How to get Bazooka tube onto FLYGUYS cooler MLT - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > How to get Bazooka tube onto FLYGUYS cooler MLT

Reply
 
Thread Tools
Old 10-03-2010, 08:05 PM   #1
inkslinger82
Recipes 
 
Nov 2007
Posts: 50
Liked 1 Times on 1 Posts



I have the "T" bazooka tube. Its not threaded, but I wanted to know if anyone knows the best way to attach this to the FLYGUY MLT. I don't mind if I have to solder it, I just want it on there nice and snug so it doesnt come off and ruin my day. Thanks!

Chris

 
Reply With Quote
Old 10-04-2010, 04:37 AM   #2
rl1373
Recipes 
 
Dec 2009
Meeeshigan
Posts: 94

Is the T copper? What type of fitting do you have coming out of your bulkhead?

 
Reply With Quote
Old 10-04-2010, 06:28 AM   #3
inkslinger82
Recipes 
 
Nov 2007
Posts: 50
Liked 1 Times on 1 Posts


yes the T fitting is copper. The bulkhead is the 3/8” female barb adapter (Watts A-298)

 
Reply With Quote
Old 10-05-2010, 04:31 PM   #4
CrackyMcZap
Recipes 
 
May 2008
Posts: 36
Liked 4 Times on 2 Posts


I used a 1/2" FPT to 1/2" sweat fitting instead of the barb adapter, then sweated in a short length of 1/2" copper pipe and a 45 street elbow. It's low enough that you can squeeze the bazooka T on underneath. Stays in place like a champ for me.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water cooler as a fermenter cooler question BrewBeemer Fermenters 4 02-22-2012 08:55 PM
Cutting a bazooka tube xxdcmast Kettles, Mash Tuns & Hot Liquor Tanks 4 09-09-2011 01:32 PM
Does any one use a Beverage Cooler for a Fermentation Cooler zman Fermenters 23 02-17-2011 06:19 AM
Boil Kettle False Bottom,Bazooka,or What? InfernoBrews Kettles, Mash Tuns & Hot Liquor Tanks 2 04-21-2010 08:09 AM
bazooka filter hammer one Kettles, Mash Tuns & Hot Liquor Tanks 23 01-25-2008 04:17 AM


Forum Jump