Beginning gravity - extracts? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Extract Brewing > Beginning gravity - extracts?

Reply
 
Thread Tools
Old 10-01-2010, 11:09 PM   #1
BlackBearForge
Recipes 
 
Jun 2010
Tallahassee, Florida
Posts: 88
Liked 2 Times on 2 Posts



Is there any particular reason to take a original/beginning gravity reading of an extract beer? Even the specialty grains are easily calculable based on the amount used.

 
Reply With Quote
Old 10-02-2010, 02:33 AM   #2
avidhomebrewer
Recipes 
 
Sep 2007
Posts: 2,553
Liked 24 Times on 23 Posts


Yes, there is. It is a starting point for you to calculate your potential alcohol amount as well as a check to see how close you get to the projected original gravity. If you are sure of your reading and your instrument but you are low, you can always add more extract to bring it up to where it should be. If you don't take a reading, you'll never have a clue as to how much extract to add if you are low. These are only 2 reasons; I bet there are more that I can't think of off the top of my head.

 
Reply With Quote
Old 10-02-2010, 03:35 AM   #3
somecallmetex
Recipes 
 
Apr 2009
Raleigh, NC
Posts: 119
Liked 2 Times on 2 Posts


Quote:
Originally Posted by avidhomebrewer View Post
Yes, there is. It is a starting point for you to calculate your potential alcohol amount as well as a check to see how close you get to the projected original gravity. If you are sure of your reading and your instrument but you are low, you can always add more extract to bring it up to where it should be. If you don't take a reading, you'll never have a clue as to how much extract to add if you are low. These are only 2 reasons; I bet there are more that I can't think of off the top of my head.
I agree, and will add to this. In general the gravity reading for an extract kit are not necessary, but one day you are going to want to try something where the reading really do matter (I am currently making a chocolate-raspberry port where each step takes place once you reach a very specific gravity). When you do try something where the gravity matters you will be very glad you already have experience with taking gravity readings (well, technically you won't give it a second thought if you already have experience, but if it's your first time it could very well add unnecessary stress, and more importantly you increase the risk of making a mistake if you have never tried this before).

So in answer to your question, in my experience taking gravity readings for an extract kit is not necessary, but it's worth doing at least once or twice because one day you are going to try something where the readings matter.
__________________
Primary- On hiatus until full wort setup complete

Secondary - EdWort's Apfelwein (Jun '11), (Feb '12), (Feb '12),

Agin/Drinking-EdWort's Apfelwein EC-1118) (Jan '11), Chocolate Raspberry Port (Fall '10), Blackberry Port (Fall '11)

 
Reply With Quote
Old 10-02-2010, 04:03 AM   #4
Nurmey
I love making Beer
HBT_LIFETIMESUPPORTER.png
 
Nurmey's Avatar
Recipes 
 
Jul 2007
Omaha, NE
Posts: 3,983
Liked 30 Times on 26 Posts


I don't believe there is a real reason. There is a certain amount of sugars in the kits and if you add the right amount of water, the kit tell you what the gravity. I'm not saying you shouldn't take the reading but you already know what it is.
__________________
Batch 1 Brewing
The American Revolution would never have happened with gun control.

 
Reply With Quote
Old 10-02-2010, 04:08 AM   #5
lumpher
Recipes 
 
Jul 2009
texas
Posts: 5,070
Liked 267 Times on 228 Posts


i eyeball everything on extract. if the wort amount, temp, and ferm time are about right, i don't bother
__________________
There is no "i" in denial.

 
Reply With Quote
Old 10-02-2010, 12:05 PM   #6
tagz
Recipes 
 
Jan 2008
Posts: 2,073
Liked 275 Times on 193 Posts


I would say it's only necessary if you want to practice for future mashes. Or, I suppose, if you were doing a full boil and were concerned about boil off. If you are topping off to X gallons, no need.

 
Reply With Quote
Old 10-02-2010, 01:45 PM   #7
BlackBearForge
Recipes 
 
Jun 2010
Tallahassee, Florida
Posts: 88
Liked 2 Times on 2 Posts


Cool, I do take final gravity readings so I will have the practice for when I go all grain (or even partial grain for that matter). I've only used it once but the Thief worked like a champ for taking the sample. Star San however nearly made i impossible to read the hydrometer.

 
Reply With Quote
Old 10-02-2010, 02:08 PM   #8
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,926
Liked 3201 Times on 1889 Posts


It's good to get into the habit for when you are doing partial mashes and all grain, where you sometimes take multiple pre and post boil readings during a brewing session. If you don't get into the habit NOW, more than likely you'll run into trouble later because your not in the habit of it in your process.

So many new brewers are so freaked out about something so simple, that even if they think there is something wrong with their beer, they will go to all manner of complex "solutions" without even determining that there is even anything really wrong.

Look at all the "stuck fermentation" threads, 99% of them they don't even know what there beer is really doing, they're going by airlock activity...they need to be told to take one....and some of these folks are brewing AG.

But they never got in the habit, and they never got their hydrometer "cherry" popped, so it's not in their trouble shooting repretoir. So I think it's to get in the habit from the get go.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 10-02-2010, 02:33 PM   #9
Germelli1
Recipes 
 
Jul 2010
Blacksburg/Herndon, VA
Posts: 2,156
Liked 37 Times on 37 Posts


Have you ever forgotten to add a can of extract, or pound of sugar, or just added the wrong amounts? If you do forget a major ingredient like that it helps you notice your error at a time when it is easy to fix.

I am kind of hipocritical because I only sometimes use my hydrometer...especially with extract batches. In fact I never took a pre-boil or starting gravity reading on my last all grain batch haha
__________________
If I had 8 hours to chop down a tree, I would spend 6 sharpening my axe. ~Abe Lincoln

 
Reply With Quote
Old 10-02-2010, 03:29 PM   #10
BlackBearForge
Recipes 
 
Jun 2010
Tallahassee, Florida
Posts: 88
Liked 2 Times on 2 Posts


Well I can definitely see how it would be good to develop the habit of taking beginning gravity readings. People, being people, often find it hard to break either good or bad habits. The process is becoming much more familiar now even after only two batches so adding a hydrometer reading on brew day is no big deal (especially since using the Thief to take samples is so easy).

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Misc. Extracts Jared36 Extract Brewing 2 02-19-2009 05:38 AM
DMS from extracts? gregs765 Extract Brewing 7 12-17-2008 09:31 AM
Should I be using extracts? blaqball Extract Brewing 10 01-26-2008 06:25 AM
mixing extracts emmpeethree Extract Brewing 1 12-11-2006 09:03 PM
Mr. Beer Extracts colonel_colon Extract Brewing 7 08-24-2006 03:20 AM


Forum Jump