A Brewing Water Chemistry Primer - Page 59 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Brew Science > A Brewing Water Chemistry Primer

Reply
 
Thread Tools
Old 02-21-2013, 11:20 PM   #581
mirogster
Recipes 
 
May 2011
New York, New York
Posts: 125
Liked 8 Times on 6 Posts


Wheew, that was close one Btw. which one do you have?

 
Reply With Quote
Old 02-22-2013, 08:56 PM   #582
NanoMan
Recipes 
 
Dec 2012
Posts: 103
Liked 8 Times on 8 Posts


I use the HM Digital PH-200 Waterproof pH and Temperature Meter. It was recommended by a pro-brewer and personal friend of mine. I am very satisfied. I don't immerse it, however. I will draw out a 2+ ounce sample and put those in narrow plastic taster glasses along with calibration solution and distilled water for rinsing. I do a calibration at the beginning of my session, then measure hot liquor (target 5.0-5.5), mash (target 5.1-5.5), pre-boil and post-boil pH (target 5.2-5.4). Then risne the meter and store it with a little solution on the sponge in the cap.

Got my meter on Amazon, $80 plus shipping. My local hydroponics shop has the calibration solutions.

Cheers!

NanoMan

mirogster Likes This 
Reply With Quote
Old 02-23-2013, 01:37 PM   #583
DustBow
 
DustBow's Avatar
Recipes 
 
May 2010
Cincy, OH
Posts: 634
Liked 21 Times on 19 Posts


That's the one I have had my eye on......
__________________
"Brewers make wort, yeast make beer."

"Brewing beer is neither complicated nor expensive. It's the responsibility of the brewer to make it as complicated and expensive as their spouse & budget will allow."

 
Reply With Quote
Old 02-26-2013, 08:29 PM   #584
NanoMan
Recipes 
 
Dec 2012
Posts: 103
Liked 8 Times on 8 Posts


Do it....

 
Reply With Quote
Old 03-12-2013, 01:34 AM   #585
phineascoates
Recipes 
 
Mar 2013
Posts: 12

This could make me simple thing while i'm using the water.If your water tastes good, your beer should taste good. How aspect of brewing could possibly affect to brewing? The addition of salts when brewing with extract is not necessary and also it is not recommended until you have gained experience with the intended recipe.

 
Reply With Quote
Old 03-15-2013, 05:23 PM   #586
MagicSmoker
 
MagicSmoker's Avatar
Recipes 
 
Jan 2013
Tampa, FL
Posts: 119
Liked 14 Times on 11 Posts


What an excellent thread! I read the entire thing (yes, all 59 pages )

I have one big question though... I've heard that reverse osmosis typically reduces the concentrations of dissolved solids by 90% (ie - water that goes into the RO system with 100ppm of Ca comes out with around 10ppm). If that is true then I probably will still have problems even using straight RO water judging by my Ward Labs report:

pH: 8.0
TDS: 374
Conductivity: 0.62 microSeimens
Cat/An Balance: 6.9/7.3

Na: 40
K: 2
Ca: 90
Mg: 7
TH: 254
NO3-N: 0.4 (1.77 as NO4)
SO4-S: 68 (204 as SO4)
Cl: 35
CO3: 6
HCO3: 115
TA: 104

Needless to say, water heaters don't last long in these here parts...

So, given the mineral content of my water to begin with, would I be better off just using straight RO, or should I still toss in a few grams of calcium chloride?

 
Reply With Quote
Old 03-15-2013, 05:34 PM   #587
mirogster
Recipes 
 
May 2011
New York, New York
Posts: 125
Liked 8 Times on 6 Posts


Is this your regular tap water ? If so, it's really ok. Imho, no need to use RO. pH is average for drinking water around the globe, Ca is ok, SO4:Cl favors hoppiness. You can build almost every style with this. Depending on grist of course. I'd use RO only to brew some really delicate Pilseners, Vienna Lagers etc.

 
Reply With Quote
Old 03-15-2013, 05:43 PM   #588
afr0byte
Recipes 
 
Aug 2010
Vermont
Posts: 1,451
Liked 74 Times on 62 Posts


The water isn't bad, for hoppy styles at least, but he'll need acid for almost all of the beers he brews. That bicarbonate level of 115 is pretty high.

 
Reply With Quote
Old 03-15-2013, 05:55 PM   #589
mirogster
Recipes 
 
May 2011
New York, New York
Posts: 125
Liked 8 Times on 6 Posts


True. I have similar water. Without some accidification (accidif. malt, lactic acid, 'bath' salts ), I can't get my mash pH to safe range 5.3-5.6 - even if brewing dark beers (the same concerns sparging water). On the other hand, RO can be used for mentioned sparging.

 
Reply With Quote
Old 03-15-2013, 06:22 PM   #590
MagicSmoker
 
MagicSmoker's Avatar
Recipes 
 
Jan 2013
Tampa, FL
Posts: 119
Liked 14 Times on 11 Posts


Yep, this is my tap water in (central) Tampa, FL (after passing through a whole-house carbon filter). One interesting fact about our water is that it is blended from 3 separate sources: the Floridan aquifer, the main rivers in Hillsborough Co (Hillsborough & Alafia, plus the Tampa Bypass Canal), and a desalination plant in Tampa Bay.

The problem I've noticed with my first 4 beers is a definite astringent taste with a more subtle soapy taste that lingers after swallowing. From all my reading here, I suspect the problem is simply a matter of alkalinity. So I bought a pH meter (Milwaukee PH55) and the full array of water adjustment chemicals from my LHBS, then loaded up my two otherwise unused Better Bottles with 10gal. of RO water (at $0.25/gal!). I was going to just use RO water with 3 grams of CaCl2, plus a couple grams of CaSO4 for good measure, then adjust the mash pH down to 5.4 with lactic acid if needed, but maybe I should just dilute my tap water in half with RO and keep the lactic acid close by just in case?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Water Chemistry Gremlyn Brew Science 25 10-27-2016 05:39 PM
Question on Water Chemistry meschaefer Brew Science 7 11-02-2010 09:39 PM
Help: Water Chemistry - ppm vs mg/L carp Brew Science 2 10-10-2009 06:54 PM
water chemistry - adjust top-up water? JLem Brew Science 12 09-23-2009 12:11 AM
Water chemistry noob Yooper Brew Science 48 09-03-2009 07:21 PM


Forum Jump