Faucets for dispensing seltzer - Page 3 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > Faucets for dispensing seltzer

Thread Tools
Old 10-04-2011, 01:16 PM   #21
Half-fast Prattlarian
GilaMinumBeer's Avatar
Jan 2008
Posts: 59,194
Liked 7676 Times on 6272 Posts

Originally Posted by gromfy View Post
Sorry if this is a dumb question, but is the 25' to reduce the speed/strength of the pour? I just put together a seltzer system with a motorized carbonator and a 425SS, with only about 2' of line. At 45 psi, it comes out too violently to control. Is the solution to coil up a bunch of dispensing length in the fridge?
Originally Posted by gromfy View Post
I just put in 35' of 1/8 and am astonished at what a huge difference it made. Probably too much...I may shorten it.

The physics mystifies me. I expected that a more narrow tube would increase pressure, like a smaller nozzle on a garden hose. It must be due to friction?

Thanks for the help and advice.
Yes. Each line type has it's own inherent "resistance" and thus cause the fluid to slow down.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Beginner's Question - Soda Syrup + Seltzer Water =? xSpeaker Soda Making 6 08-29-2010 03:34 AM
Seltzer vs soda claphamsa Soda Making 4 03-17-2010 11:55 AM
Seltzer? claphamsa Soda Making 8 11-03-2009 05:03 PM
Carbonator cap for making seltzer nostalgia Soda Making 5 10-17-2009 01:29 PM
Seltzer water and Kegging System bharrison Soda Making 3 09-01-2009 05:30 AM

Forum Jump