Boil Experiment - how long is too long? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Boil Experiment - how long is too long?

Reply
 
Thread Tools
Old 09-28-2010, 07:46 PM   #1
HomelessWook
Recipes 
 
Dec 2009
804
Posts: 166
Liked 1 Times on 1 Posts



In prep for my brew day saturday and my first partial i decided to see just how long it would take to boil water on my gas stove.

I put 4.5 gallons of water into my brew pot and cranked on the burner. It took between 90 and 100 mins to reach boil.

I figure i will be boiling less than 4.5 gallons and the starting temperature of my wort will be about 160degrees so that time should come down significantly - im thinking 80 minutes tops (hoping to reach boil in 60).

I was wondering if worst came to worst and i didnt get the wort boiling for over 90 mins - if that would be a problem.

im sure the quicker you reach a boil the better and im debating buying a turkey fryer. However, i would love to be able to save some cash and brew inside.

 
Reply With Quote
Old 09-28-2010, 07:51 PM   #2
BillyBroas
HBT_LIFETIMESUPPORTER.png
 
BillyBroas's Avatar
Recipes 
 
Oct 2009
SoCal
Posts: 493
Liked 21 Times on 11 Posts


90-100 minutes is waaaay too long to bring it to a boil. It won't hurt anything, but it will drive you mad. Could you just boil 3 gallons and then top off with water at the end? I assume you were going to top off anyways.

Also, see if you can straddle two burners with your pot and turn them both on high. That's the only way my stove top will get my water boiling.

If you can afford the turkey fryer, get it. You won't regret it one bit.
__________________
The Homebrew Academy - We teach you how to brew beer that rocks.
L][/B]

 
Reply With Quote
Old 09-28-2010, 09:12 PM   #3
HomelessWook
Recipes 
 
Dec 2009
804
Posts: 166
Liked 1 Times on 1 Posts


well if i was doing an all extract kit i would do 3 gallons but im doing a partial so i will have the sparge and the steeping water to take into account - not sure how much steeping water i will be using but i imagine it will be about 2 gallons and than the sparge water will also be about 2 gallons i think.

making it so i have to boil 4 gallons or so

im thinking though since i will have a pot with water at 160 degrees and a pot with water at 170 degrees that when i mix the 2 and start the boil it will reach 212 degrees much faster than 90-100 minutes.

 
Reply With Quote
Old 09-28-2010, 09:45 PM   #4
BillyBroas
HBT_LIFETIMESUPPORTER.png
 
BillyBroas's Avatar
Recipes 
 
Oct 2009
SoCal
Posts: 493
Liked 21 Times on 11 Posts


Ah sorry I overlooked where you mentioned it was a partial. Yea that will cut a ton of time off your wait. If not, you can always figure out what to do from there. Would the 2 burner option I mentioned work for you?
__________________
The Homebrew Academy - We teach you how to brew beer that rocks.
L][/B]

 
Reply With Quote
Old 09-28-2010, 10:08 PM   #5
HomelessWook
Recipes 
 
Dec 2009
804
Posts: 166
Liked 1 Times on 1 Posts


yes, i straddled the burners on a brew i did before - however im not sure how much that actually helped - perhaps i will do another experiment later tonight or tomorrow and see the difference.

thanks

 
Reply With Quote
Old 09-28-2010, 10:12 PM   #6
Germelli1
Recipes 
 
Jul 2010
Blacksburg/Herndon, VA
Posts: 2,156
Liked 36 Times on 36 Posts


You could also build an electric heat stick to give you a boost to boil.
__________________
If I had 8 hours to chop down a tree, I would spend 6 sharpening my axe. ~Abe Lincoln

 
Reply With Quote
Old 09-28-2010, 10:13 PM   #7
Germelli1
Recipes 
 
Jul 2010
Blacksburg/Herndon, VA
Posts: 2,156
Liked 36 Times on 36 Posts


http://hbd.org/pcalinsk/HeatStk3.htm
__________________
If I had 8 hours to chop down a tree, I would spend 6 sharpening my axe. ~Abe Lincoln

 
Reply With Quote
Old 09-28-2010, 10:30 PM   #8
captainL
Recipes 
 
Sep 2010
Houston, TX
Posts: 280
Liked 10 Times on 10 Posts


What about microwaving a few gallons up to a boil before throwing it in the pot????

 
Reply With Quote
Old 09-28-2010, 10:39 PM   #9
RogerMcAllen
Recipes 
 
Apr 2009
Decatur, IL
Posts: 623
Liked 6 Times on 6 Posts


Use more pots/burners. Get your 4 largest pots, and split the volume between them.

 
Reply With Quote
Old 09-28-2010, 10:47 PM   #10
portalgod
Recipes 
 
Mar 2010
Washington
Posts: 122

+1 on split boil. That's how I do full volume 5 gallon (5 gallon ending volume) AG brews. I use deathbrewers stovetop method (holding up 12 pounds of grain in the bag is friggin heavy, btw) and then do split boils after mixing the mash+sparge well to even out the gravity.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How long of a boil is too long of a boil? hokenfloken Beginners Beer Brewing Forum 19 05-04-2013 01:45 AM
How long to boil wort? captaingoat Beginners Beer Brewing Forum 2 05-19-2010 09:50 PM
How long is long enough for a long primary weizen? TVarmy Beginners Beer Brewing Forum 1 03-16-2010 02:37 PM
Extra long boil rvabrad Beginners Beer Brewing Forum 7 10-26-2009 12:51 PM
How long should I boil? Long Live Liver Beginners Beer Brewing Forum 3 02-28-2006 01:36 AM


Forum Jump