Keezer Light Power Cord Problem - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Keezer Light Power Cord Problem

Reply
 
Thread Tools
Old 09-21-2010, 02:28 AM   #1
Otiluke
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
boston
Posts: 47


So my Keezer collar is almost done and I've encountered a problem. The cord for the freezer light isn't long enough once the collar is attached. I've disconnected it from the inside so that I can get the lid on but, I'd like the light to be functional. Where can I find the plugs to bridge the gap. It is a 3 pin plastic clip (like the 4 pin in a computer). I only need a few inches.

 
Reply With Quote
Old 09-21-2010, 02:35 AM   #2
TomSD
Da Geek
HBT_LIFETIMESUPPORTER.png
 
TomSD's Avatar
Recipes 
 
Aug 2010
Lemon Grove, CA, CA
Posts: 1,361
Liked 33 Times on 24 Posts


Probably easier to get a little wire and splice behind the plug. Odds are you will mess up the plug if you don't. That or hit Radio shack, find a plug that is the same gauge and has the same number of plugs and extend your wiring that way.
__________________

Johnson Controller rewire
| Keezer (FCM7SUWW) build | Love Controller box build | Soda Syrups/Concentrates

God is an imaginary friend for grownups., Walter Crewes (Morgan Freeman), The Big Bounce

Don't be afraid to ask dumb questions they're easier to handle than dumb mistakes!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need source for power cord for my electric rig pickles Brew Stands 9 10-08-2012 02:31 PM
SOOW Power Cord Ranger9913 Brew Stands 4 06-01-2010 09:05 PM
Shore Power Cord? Mose Brew Stands 8 04-16-2010 05:12 PM
Keezer Collar Problem kniles38 Kegerators & Keezers 1 10-10-2009 12:11 AM
Window A/C unit using extension cord and power strip ThreeTaps Fermenters 15 10-01-2009 12:33 AM


Forum Jump