Hopstopper vs. Domed False Bottom - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Hopstopper vs. Domed False Bottom

Reply
 
Thread Tools
Old 01-15-2007, 02:33 PM   #1
Ryan_PA
 
Ryan_PA's Avatar
Recipes 
 
Aug 2006
Horsham, PA, Pennsylvania
Posts: 1,881
Liked 12 Times on 8 Posts



Well, until today I had my mind made up that I was going to be getting a hopstopper...then I read a post by Yuri saying the domed false bottoms at more beer are as good. I do not want to question Yuri's point, but further explain what I am looking to accomplish.

I have a shirron plate chiller and I am trying to reduce/eliminate the chance of getting any pellet hops or hot break into it as possible. I am at the point where I am ready to order, actually I meant to order this past weekend, but time became an issue. After pricing out the hardware for the hopstopper, I am coming in at close to $100. Looking at the false bottoms, I would be about $45 cheaper. I do not want to save the money at the cost of performance. Which would be the better choice, or is there a third option I have not even considered yet?

Also, I have been looking for a weldless kettle coupler that will work with the hopstopper. According to the site, the thread size has an option "Thread Size: either 3/8" NPT or 1/2" NPT", but most, if not all of the weldless bulkheads I have seen are not threaded. Am I missing something?

 
Reply With Quote
Old 01-15-2007, 03:38 PM   #2
Pumbaa
I prefer 23383
HBT_LIFETIMESUPPORTER.png
 
Pumbaa's Avatar
Recipes 
 
Oct 2005
Milwaukee, Wisconsin
Posts: 7,262
Liked 75 Times on 56 Posts


My weldless bulkhead fitting is threaded on the inside of the fitting . . . .

OK this doesnt sound right and I cant figure out how to make it sound right . . . .

when my bulkhead fitting is installed the part on the inside of the kettle has threads on the inside of the fitting . . . .

that make sense? are you looking at pictures of the fittings where you wouldnt be able to see the inside of them or are you looking at the fittings themselves and they aren't threaded at all?
__________________
Quote:
Originally Posted by P.J. O'Rourke
"There are just two rules of governance in a free society: Mind your own business. Keep your hands to yourself."

 
Reply With Quote
Old 01-15-2007, 03:51 PM   #3
Ryan_PA
 
Ryan_PA's Avatar
Recipes 
 
Aug 2006
Horsham, PA, Pennsylvania
Posts: 1,881
Liked 12 Times on 8 Posts


Quote:
Originally Posted by Pumbaa

that make sense? are you looking at pictures of the fittings where you wouldnt be able to see the inside of them or are you looking at the fittings themselves and they aren't threaded at all?
When I look at this fitting:


The portion inside the kettle appears to not be threaded. I know this piece has to attach somehow to the coupler, and I imagine it is threaded, but I have never seen one in person, so I am not sure if I can use it to attach to a hopstopper or false bottom...

 
Reply With Quote
Old 01-15-2007, 03:57 PM   #4
Pumbaa
I prefer 23383
HBT_LIFETIMESUPPORTER.png
 
Pumbaa's Avatar
Recipes 
 
Oct 2005
Milwaukee, Wisconsin
Posts: 7,262
Liked 75 Times on 56 Posts


ok yeah, that smooth steel piece on the left side of the fitting (the part that goes inside the kettle) is threaded on the inside. There is actually a nipple that holds that steel piece on the left to the brass valve.

let me look around I know there is an image of one of those things broken down somewhere . . .

**EDIT**
ok here is that fitting minus the valve

The piece that you see when you look inside a kettle is called a straight conector. It's threaded on the inside. Connected to that is a nipple that passes through the side of the kettle to your valve (with washers and o-rings to prevent leaks)
__________________
Quote:
Originally Posted by P.J. O'Rourke
"There are just two rules of governance in a free society: Mind your own business. Keep your hands to yourself."


 
Reply With Quote
Old 01-15-2007, 05:39 PM   #5
Ryan_PA
 
Ryan_PA's Avatar
Recipes 
 
Aug 2006
Horsham, PA, Pennsylvania
Posts: 1,881
Liked 12 Times on 8 Posts


Quote:
Originally Posted by beer4breakfast
Even the all stainless version that I am about to order costs less than $100, and the standard version is $60.
No, the $100 is for buying the standard version offered on the site. I was factoring in the hardware and shipping as well since I do not have a bulkhead in my kettle currently.

 
Reply With Quote
Old 01-15-2007, 06:34 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,201
Liked 1659 Times on 1072 Posts


I'm trying to figure out the mesh type used on the hopstopper. This stuff is rated in how many holes there are per inch and looking at Mcmaster, there seems to be a lot to choose from. If you don't mind the dip tube being copper, you can build it for way less than $100.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 01-15-2007, 06:57 PM   #7
Ryan_PA
 
Ryan_PA's Avatar
Recipes 
 
Aug 2006
Horsham, PA, Pennsylvania
Posts: 1,881
Liked 12 Times on 8 Posts


I have heard that other attempts to replicate this design have not gone well...

I have no issue spending the cash, I just want to see if this is the best way to accomplish what I am looking to do...

 
Reply With Quote
Old 01-15-2007, 07:17 PM   #8
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 94 Times on 62 Posts


I think I have the cheapest hop stoper at 50 cents.


__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 01-15-2007, 07:28 PM   #9
Ryan_PA
 
Ryan_PA's Avatar
Recipes 
 
Aug 2006
Horsham, PA, Pennsylvania
Posts: 1,881
Liked 12 Times on 8 Posts


Quote:
Originally Posted by orfy
I think I have the cheapest hop stoper at 50 cents.

If you were to load that sucker up with a 10 oz. pellet hop bill, how do you think it would fair?

 
Reply With Quote
Old 01-15-2007, 07:29 PM   #10
trinitone
 
trinitone's Avatar
Recipes 
 
Sep 2006
Philadelphia, PA
Posts: 417

Quote:
Originally Posted by orfy
I think I have the cheapest hop stoper at 50 cents.
And you can clean with it when you're done!
__________________
Planning: Ned's Red (Flanders style)
Primary: Niet
Secondary 1: Cripple Kriek (a 'pseudo' cherry lambic)
Secondary 2: Monk's Tripel...
Bottled: Dark Star Brown Ale, Watership Stout, Yet to be named cider

Well... a person can work up a mean, mean thirst after a hard day of nothing much at all.

This kind of an area is the best place for survival because you do have good, basically intelligent, hard working, decent people and they're all armed to the teeth... and that's my kind of people.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
SS false bottom for 10 gallon cooler..grain all stuck under outside and filled bottom discgolfin All Grain & Partial Mash Brewing 10 05-06-2011 04:58 PM
False Bottom SugarJohnson Kettles, Mash Tuns & Hot Liquor Tanks 2 05-12-2009 04:12 PM
Pickup location from bottom on false bottom Darboy Equipment/Sanitation 1 03-01-2009 07:58 PM
MLT false bottom Homercidal Kettles, Mash Tuns & Hot Liquor Tanks 3 09-09-2008 07:36 PM
False Bottom Dark_Ale Equipment/Sanitation 3 01-24-2005 10:55 AM


Forum Jump