Houblon Monstre Triple IPA... - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > Houblon Monstre Triple IPA...

Reply
 
Thread Tools
Old 09-14-2010, 04:50 PM   #1
thorson138
Recipes 
 
Sep 2009
USA
Posts: 116


I have a 5 gallon batch of this which has completed ferment. I started it on the first day of this month and it fermented out within the first week.

I haven't done a secondary--it has stayed in the primary this whole time. I wonder if it would be ok to go ahead and bottle by the end of this week.

It is in a tuff-tank which has a valve toward the bottom for easy transfer. Do you all think I would be alright to bottle at this point???

Thanks for any replies.

Mike

 
Reply With Quote
Old 09-14-2010, 08:38 PM   #2
ThatGuyRyan
Recipes 
 
Jan 2009
Elmhurst, IL, IL
Posts: 631
Liked 13 Times on 10 Posts


Quote:
Originally Posted by thorson138 View Post
I have a 5 gallon batch of this which has completed ferment. I started it on the first day of this month and it fermented out within the first week.

I haven't done a secondary--it has stayed in the primary this whole time. I wonder if it would be ok to go ahead and bottle by the end of this week.

It is in a tuff-tank which has a valve toward the bottom for easy transfer. Do you all think I would be alright to bottle at this point???

Thanks for any replies.

Mike
What was the starting and final gravity? Never had this beer but I assume itís a high % beer and if so I wouldnít bottle it so soon. I would give it another week in primary depending on the gravity and then a good month in secondary if possible.
__________________
shat happens

 
Reply With Quote
Old 09-14-2010, 08:39 PM   #3
adc123
Recipes 
 
Jun 2010
Santa Barbara CA
Posts: 103
Liked 1 Times on 1 Posts


That is still a very young beer for its original gravity. If anything you need to keep in the primary longer, I would say two weeks isn't enough. What is your gravity reading right now, ie, what do you call "finished"? More time in the primary would be good, at least a month I would say. Bulk aging / secondary gives better beer; the little bit of yeast that's still in the secondary is working its magic on some of the off flavors because of the vigorous primary fermentation. Since you have that nice valve, why not taste it? If you like where it is, go and bottle, but I think it will just get better if you wait a bit longer.
__________________
On Deck: Evil Twin All Grain
Primary BB: 50/50 (Braggot)
Secondary BB: Empty
Secondary Glass: Ed Wort's Apelwein
Ideas: Oatmeal Stout

 
Reply With Quote
Old 09-14-2010, 08:41 PM   #4
DKershner
 
DKershner's Avatar
Recipes 
 
Jul 2009
Bend, OR
Posts: 1,870
Liked 28 Times on 23 Posts


Quote:
Originally Posted by ThatGuyRyan View Post
What was the starting and final gravity? Never had this beer but I assume itís a high % beer and if so I wouldnít bottle it so soon. I would give it another week in primary depending on the gravity and then a good month in secondary if possible.
It is a high grav belgian style IPA (which doesnt actually exist). Its a NB kit if I am not mistaken. You need to drink this one younger to keep the hop flavor. That being said, I would let it sit for at least a month in the primary. Bottle it in 2-4 weeks and drink as soon as it is carbonated (3 weeks after that).

 
Reply With Quote
Old 09-14-2010, 11:07 PM   #5
thorson138
Recipes 
 
Sep 2009
USA
Posts: 116

hey folks! I took a sample of this beer to test the gravity and taste this evening.

The gravity was down to 1.010 if I am reading the hydrometer correctly. It shows a PABV of about 1.5%.

The flavor is very hoppy and I like it over all. I'll give it another week or so and check it again. I'm waiting on bottles to arrive anyway. They should be here in another day or two.

Does it take beer 3 weeks to carbonate after bottling as mentioned above??? I was not aware of that.

 
Reply With Quote
Old 09-15-2010, 12:33 AM   #6
DKershner
 
DKershner's Avatar
Recipes 
 
Jul 2009
Bend, OR
Posts: 1,870
Liked 28 Times on 23 Posts


Quote:
Originally Posted by thorson138 View Post
Does it take beer 3 weeks to carbonate after bottling as mentioned above??? I was not aware of that.
http://www.homebrewtalk.com/blogs/re...ditioning.html

 
Reply With Quote
Old 09-20-2010, 09:11 PM   #7
thorson138
Recipes 
 
Sep 2009
USA
Posts: 116

Just an update... I bottled this batch a couple days ago. The gravity had been stable and the taste was good, so I went ahead and made up a priming solution of 16oz water and a little under 2/3 cup table sugar and racked on top of it.

I'm waiting for it to carb at this point. It is in the bottle boxes in the closet at around 70-72* or so. I'm anxious to try a few bottles cold and see how it turned out.

Did I use too much or not enough table sugar? What are your thoughts on how the carbonation will turn out?

 
Reply With Quote
Old 09-20-2010, 09:21 PM   #8
adc123
Recipes 
 
Jun 2010
Santa Barbara CA
Posts: 103
Liked 1 Times on 1 Posts


I think you will be just fine with that carbonation. I have personally done seven batches (all extract) and all into bottles. I find sugar a weird beast; sometimes its flat, sometimes its over carbonated. I can't seem to find a balance. Even waiting months my 12oz stouts just never got carbed, but the 22oz bottles were carbed. Every IPA overcarbonated in the bottle, but I think thats becuase i added 2/3cup + water to less than 5 gals of beer.

As an aside, I plan on trying some carbonation drops and cuvee yeast to restart carbonation in bottles of my stout. I have heard the one drop is enough, and the cuvee is meant for bottle carbonation (of champagne, but I don't mind). Ill see how that one goes. For overcarbonation, ive been playing with cold bottles, uncapping for a minute, and recapping. It works okay, still experimenting. I just wish i could keg!
__________________
On Deck: Evil Twin All Grain
Primary BB: 50/50 (Braggot)
Secondary BB: Empty
Secondary Glass: Ed Wort's Apelwein
Ideas: Oatmeal Stout

 
Reply With Quote
Old 09-21-2010, 01:43 AM   #9
bmbox12
Recipes 
 
Jan 2009
Iola, Wisconsin
Posts: 76
Liked 2 Times on 1 Posts


Just was cruising around and saw this post, Revvy's rules on bottle conditioning are dead on, and some good reading. Also, one other thing that I learned the hard way, and yes there are people who are against this as well as for it, so take it for what it's worth. After adding your priming sugar STIR it. I have had a couple batches that some were flat and the next bottle would be over carbonated. Stirring has helped me anyways.

 
Reply With Quote
Old 09-22-2010, 09:36 PM   #10
jalgayer
 
jalgayer's Avatar
Recipes 
 
Feb 2010
Carbondale, PA
Posts: 498

I have always adding the priming sugar mixture to the bottom of the bottling bucket then racked on top and put the tube angled so it kinda gets a whirlpool going in the bottom. Has always mixed it up perfectly.
__________________
Regards,
Jason

BOTTLED / DRINKING
Mad-Elf Inspiration, Graff


SECONDARY
Flander's Sour Red {1 Year Old on July 28, 2011}

PRIMARY
Vanilla-Almond Pumpkin Ale, Surly Furious, Triple Karmelite Clone


ON DECK
Double White

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
BB Belgian Triple questions david_the_greek Extract Brewing 4 07-29-2010 04:43 PM
Triple taste horrid cabledawg Extract Brewing 21 12-31-2009 04:44 PM
Belgian Triple question BubbaK Extract Brewing 1 03-20-2009 10:56 AM
Triple brew day shecky Extract Brewing 11 07-23-2008 08:37 PM
Belgian Triple dj_van_gilder Extract Brewing 5 07-10-2007 05:48 AM


Forum Jump