I am piecing together parts for my Keezer Draft Setup - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > I am piecing together parts for my Keezer Draft Setup

Thread Tools
Old 09-13-2010, 08:20 PM   #1
Jan 2010
Posts: 272
Liked 2 Times on 2 Posts

I had a question about regulators.
I got the freezer, going to get 2 corny's tomorrow. I need a regulator, lines/fittings and a tank.

Are pretty much every beverage co2 regulators universally threaded to fit most any tank? There is a good looking one on ebay that was used for "soda" draft setups and he is not sure if they will work with beer. As long as they fit on the tank, I imagine they are fine.


Any thoughts? What size tank should I get? I can fit a 5lb in my 5 cu foot freezer. Should I go bigger or smaller?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Parts list for expanding my keezer valicious Bottling/Kegging 2 02-09-2010 07:53 PM
Santa May Bring Keezer Parts WormBoy Bottling/Kegging 2 12-15-2009 07:48 PM
Draft system parts list lurker18 Bottling/Kegging 2 11-10-2009 03:43 PM
List of keezer parts discgolfin Bottling/Kegging 0 02-29-2008 02:04 PM
Built-In Draft Setup / Refrigeration vs. Draft Box Fiery Sword Bottling/Kegging 5 11-09-2006 07:03 PM

Forum Jump