CFC length for 10 gallon batches - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > CFC length for 10 gallon batches
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 09-13-2010, 12:39 AM   #1
bakins
Recipes 
 
May 2008
West Georgia
Posts: 728
Liked 6 Times on 6 Posts



What length CFC should I use for 10 gallon batches? Is 25' good? I had been doing no-chill for over a year, then went back to chilling and remembered why I hate my plate-chiller (yes, I used hopbags and whirlpooled).


__________________
No sparge, no chill, no MLT, no HLT, no propane, no worries...

 
Reply With Quote
Old 09-13-2010, 02:00 AM   #2
Reddog68
Recipes 
 
Oct 2008
Bakersfield, CA
Posts: 92
Liked 1 Times on 1 Posts


Mine is 25', and it works great for 10 gallon batches.

 
Reply With Quote
Old 09-13-2010, 04:23 AM   #3
orangehero
Recipes 
 
Apr 2010
Northeast
Posts: 1,707
Liked 296 Times on 185 Posts


You may want a larger diameter for larger batches so you can get it through the chiller more quickly....though if I remember correctly the time is not that long even for 10 gals at the proper flow rate for 25ft. 3/8" copper.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Minimum burner BTU - 10 gallon batches in 15.5 gallon keggle schneemann Equipment/Sanitation 21 10-27-2009 04:01 PM
Going to 10 gallon batches TeufelBrew Equipment/Sanitation 3 01-15-2009 03:40 PM
5 Gallon Batches. woog11 Equipment/Sanitation 7 12-09-2008 05:44 PM
25' IC for 11 gallon batches Soulive Equipment/Sanitation 7 01-16-2008 10:18 PM
5, 10, or 15 gallon batches? Yuri_Rage Equipment/Sanitation 44 09-27-2006 02:41 AM


Forum Jump