Microwave RIM system - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Microwave RIM system

Reply
 
Thread Tools
Old 01-10-2007, 09:27 PM   #1
brewman !
Recipes 
 
Nov 2006
Posts: 1,428
Liked 34 Times on 31 Posts



This might be a simple way to implement a RIMS heater without using a direct contact heating coil.

http://picasaweb.google.com/beermeis...09327335975026

The microwave could be a high output 1300 watt model, say by Panasonic, for $90. I like the fact that this one has true variable output, not on/off output. I wonder if the keep warm setting uses a temp sensor and would turn up the power as needed to keep the wort warm.

http://www.epinions.com/content_196118482564

For a 5 gallon batch with 8 pounds of grain, the mash will be 3.14 gallons at 1.25 quarts per pound. The mash weight will be about 24 pounds.

1300 watts = 4435 btu/hour = 74 btu/minute. 74 btu/minute/24 pounds = 3F/minute, which is not bad. To go from 135 to 155 would take 7 minutes at full power.

The nice things about this setup are
- its simple
- its not too expensive
- it has zero heat capacitance, meaning it instantly heats up the circulating wort and instantly stops heating it
- its a gentle heat
- it won't burn the wort, provided the recirculation rate is high enough.

Comments ?


__________________
Getting back into brewing...

 
Reply With Quote
Old 01-10-2007, 09:47 PM   #2
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 94 Times on 62 Posts


Interesting.

I've never heard that idea before. Do you have president/reference for the idea?

Are you thinking of testing it.
I'm sure you'd be able to get an old microwave for free and test it. Even if its a lower wattage it'll brove the idea.

I'm thinking that microwave have hot spots but I'm assuming not enough to scorch the wort,. The only things I'd be concerned about is if it vaporises wort and cases oxidisation. Also I'd be concerned about microwave safety. (I don't know anything about it)


__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 01-10-2007, 09:47 PM   #3
Hopfan
Nice Beaver....
HBT_LIFETIMESUPPORTER.png
 
Hopfan's Avatar
Recipes 
 
Sep 2006
Lincoln University, PA
Posts: 658
Liked 1 Times on 1 Posts


whooooaaaa, that's hot! So I'm assuming that you would run the micro's temp sensor to the MLT and use that to control the heat? Would you run the pump continuously or use a relay to control it based on micro run? This looks like a fun setup.
__________________
When we find out how many bodies you buried in the basement, will we be more shocked or disappointed at the number?

Zip ties are the duct tape of the 21st century

Bad Dog Brewing
Sit...Stay

 
Reply With Quote
Old 01-10-2007, 09:53 PM   #4
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
 
the_bird's Avatar
Recipes 
 
May 2006
Adams, MA
Posts: 20,874
Liked 520 Times on 419 Posts


Co-incidentally, I was thinking about this when I replaced my microwave last week, but I have no where near the level of expertise to even think about playing around with this.

Anyone wants a free microwave to play around with, you pick up!
__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

 
Reply With Quote
Old 01-10-2007, 09:59 PM   #5
brewman !
Recipes 
 
Nov 2006
Posts: 1,428
Liked 34 Times on 31 Posts


"Do you have president/reference for the idea?"

I thought of it at noon when making lunch. About a month ago I did a post about moving the microwave horn into the mash tun, but that seems too messy. Lately I've been active in several posts about heating elements and RIMS heaters. This just popped into my head.

I dunno if I am going to try it. I just got my mash steamer done last night. So many toys, so little time to play !

I think this would work pretty well. It would be a bit slow for doing step 10 gallon mashes, but just fine for 5 gallon mashes.

"So I'm assuming that you would run the micro's temp sensor to the MLT and use that to control the heat? Would you run the pump continuously or use a relay to control it based on micro run?"

I dunno. There are a number of ways to work it.
__________________
Getting back into brewing...


 
Reply With Quote
Old 01-10-2007, 10:20 PM   #6
Erbium:YAG
 
Erbium:YAG's Avatar
Recipes 
 
Aug 2006
New Jersey
Posts: 426
Liked 3 Times on 2 Posts


This is definitely not a good idea. The interior of a microwave oven is an enclosure which contains the microwave radiation. Even the window has a perforated metal mesh which prevents leakage. In order to pass the tubing into the interior, you would have to compromise the integrity of the enclosure and microwave radiation would definitely have a way out. It's not something I would ever try. The last thing I would want to find out fifteen years down the road is that I have an inoperable brain tumor because I didn't want to risk scorching my wort. Just my opinion though.

 
Reply With Quote
Old 01-10-2007, 10:26 PM   #7
Hopfan
Nice Beaver....
HBT_LIFETIMESUPPORTER.png
 
Hopfan's Avatar
Recipes 
 
Sep 2006
Lincoln University, PA
Posts: 658
Liked 1 Times on 1 Posts


Quote:
Originally Posted by erbiumyag
This is definitely not a good idea. The interior of a microwave oven is an enclosure which contains the microwave radiation. Even the window has a perforated metal mesh which prevents leakage. In order to pass the tubing into the interior, you would have to compromise the integrity of the enclosure and microwave radiation would definitely have a way out. It's not something I would ever try. The last thing I would want to find out fifteen years down the road is that I have an inoperable brain tumor because I didn't want to risk scorching my wort. Just my opinion though.
Hmmm...scorched wort or brain tumor? You've gotta have your priorities.
__________________
When we find out how many bodies you buried in the basement, will we be more shocked or disappointed at the number?

Zip ties are the duct tape of the 21st century

Bad Dog Brewing
Sit...Stay

 
Reply With Quote
Old 01-10-2007, 10:29 PM   #8
brewman !
Recipes 
 
Nov 2006
Posts: 1,428
Liked 34 Times on 31 Posts


Whoa, whoa, whoa.... before we all get brain cancer, lets get our facts straight !

The mesh in a microwave is called a faraday cage. I'm an electrical engineer.

http://en.wikipedia.org/wiki/Faraday_cage

Microwaves are absorbed by water. As long as the hoses running into and out of the chamber have water or wort in them, there will not be any radiation. The amount of radiation due to 2 small holes would be small. One could use metal tubes as the feed through the microwave cage.

Microwave radiation does not cause brain tumors or anything else for that matter. Don't confuse microwave radiation with nuclear radiation. They are different.

http://www.ewh.ieee.org/soc/embs/comar/phone.htm

BTW: do you use a cell phone ? Do you hold it next to your brain ?

For anyone really concerned about microwave power levels, you can buy an inexpensive microwave radiation detector. Most of the microwave service shops will have them.
__________________
Getting back into brewing...


 
Reply With Quote
Old 01-10-2007, 10:55 PM   #9
brewman !
Recipes 
 
Nov 2006
Posts: 1,428
Liked 34 Times on 31 Posts


One could install a small piece of metal mesh into the pass through tubes as well. The mesh in the microwave faraday cage is easily porous enough to pass clean wort.
__________________
Getting back into brewing...

 
Reply With Quote
Old 01-10-2007, 11:19 PM   #10
Erbium:YAG
 
Erbium:YAG's Avatar
Recipes 
 
Aug 2006
New Jersey
Posts: 426
Liked 3 Times on 2 Posts


I agree that microwave radiation in the levels used in cellular communication are not going to cause brain tumors; but I'm sure two holes in a 1300W microwave are going to (or at least potentially) put out more. Yes, water will absorb microwaves, but the tubing itself will not. I can see your point if you used metal tubing to initially feed in, that would probably work, as long as you maintain flow of the wort, as you stated. My point is that microwave radiation is indeed dangerous if exposure levels are high enough and I personally wouldn't take chances in overexposing myself.

http://ewh.ieee.org/soc/embs/comar/standardsTIS.pdf

I'm not trying to rattle your cage. You might feel perfectly comfortable in trying this out because of your own knowledge; but I think that others who are less knowledgable should realize that there are definite risks, whether real or potential involved.

I'm a high power medical laser systems engineer with a degree in EE too.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The microwave and re-hydrating yeast. CharlosCarlies General Techniques 4 07-13-2009 08:47 PM
microwave sanitation? wiseman Equipment/Sanitation 11 12-29-2008 05:08 PM
Microwave Sterilization korndog Equipment/Sanitation 15 11-07-2008 06:26 PM
Using a microwave to dry hops Danek Hops Growing 6 06-12-2008 02:55 AM
Microwave mashing DOESN'T work brewman ! General Techniques 18 02-13-2007 08:23 PM


Forum Jump