Lifespan of Cooler Mash Tun? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Lifespan of Cooler Mash Tun?

Reply
 
Thread Tools
Old 08-27-2010, 02:38 PM   #1
jimbus
Recipes 
 
Jun 2010
Cincinnati, OH
Posts: 52
Liked 11 Times on 2 Posts



I just made my first mash tun from a Coleman Xtreme 52qt and was wondering how long I can expect to get use out of it. I know these coolers are meant to hold cold, not hot and I have heard that a bit of warping can occur. Does the warping ever become a physical barrier to the functionality of the mash tun?

 
Reply With Quote
Old 08-27-2010, 02:40 PM   #2
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,822
Liked 3451 Times on 3276 Posts


Mine's going on 2 years. Cooler is still fine but my braid is shot and needs replaced before my next brew.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas.

 
Reply With Quote
Old 08-27-2010, 03:15 PM   #3
ArcaneXor
 
ArcaneXor's Avatar
Recipes 
 
Nov 2007
Posts: 4,572
Liked 117 Times on 104 Posts


The tun itself should last for several years (at least until the plastic starts cracking, which would allow the wort to leak into the insolation layer). The braid probably needs replacing once a year to every other year.

 
Reply With Quote
Old 08-27-2010, 03:52 PM   #4
HalfPint
 
HalfPint's Avatar
Recipes 
 
Oct 2009
Houston
Posts: 1,771
Liked 13 Times on 12 Posts


I made a copper manifold, so I don't have the issue with the braid going bad, but I do know that the heat of the mash has warped the plastic on the outside of the cooler that I've been using for about a year and a half. I'd say the copper manifold was definitely a good investment.

 
Reply With Quote
Old 08-27-2010, 07:02 PM   #5
Beerbeque
HBT_SUPPORTER.png
 
Beerbeque's Avatar
Recipes 
 
Feb 2008
Sierra foothills CA
Posts: 511
Liked 27 Times on 20 Posts


Remember to keep your cooler MLT cracked open when not in use to avoid it getting a bad smell in it and periodically fill it with oxyclean solution, soak it overnight and it will sparkle almost like new.
__________________
Give us this day our liquid bread

 
Reply With Quote
Old 08-27-2010, 07:07 PM   #6
Denny
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jun 2005
Eugene, OR
Posts: 4,751
Liked 637 Times on 457 Posts


Mine has been in use for 12 years and 380 batches. Same cooler, same braid, same tubing and valve. I clean it with Oxiclean every 3-5 years, whether it needs it or not!
__________________
Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - "Homebrew All Stars" now shipping!

 
Reply With Quote
Old 08-27-2010, 07:08 PM   #7
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
 
the_bird's Avatar
Recipes 
 
May 2006
Adams, MA
Posts: 20,889
Liked 528 Times on 424 Posts


The warping, I'd suspect is more of an issue of adding water that's just too hot, rather that something that's going to happen inevitably. I've added plenty of boiling/near-boiling water to my cooler when I preheat it, and I've seen nothing. Been using it for probably three years, still just as good as when I first got it.

Besides, it was only ~$20 when I bought it, if I need to replace it at some point, not the end of the world.
__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

 
Reply With Quote
Old 08-27-2010, 07:23 PM   #8
AZ_IPA
PKU
HBT_LIFETIMESUPPORTER.png
 
AZ_IPA's Avatar
Recipes 
 
Jun 2008
The Cold Part of AZ
Posts: 52,631
Liked 8700 Times on 6990 Posts


Quote:
Originally Posted by Denny View Post
Mine has been in use for 12 years and 380 batches. Same cooler, same braid, same tubing and valve. I clean it with Oxiclean every 3-5 years, whether it needs it or not!
epic

 
Reply With Quote
Old 08-27-2010, 08:36 PM   #9
DeafSmith
HBT_LIFETIMESUPPORTER.png
 
DeafSmith's Avatar
Recipes 
 
Jan 2009
Richardson, TX
Posts: 1,448
Liked 34 Times on 32 Posts


Quote:
Originally Posted by the_bird View Post
The warping, I'd suspect is more of an issue of adding water that's just too hot, rather that something that's going to happen inevitably.
I wonder if heating the cooler gradually might help prevent warping. I'm putting together my all grain system, and what I plan to do is leave the water heating kettle and the coolers (MLT and HLT) hooked up to the pump as I heat the water. I have a toggle switch for the pump conveniently mounted, so as I heat the water, I can pump a couple of gallons into the cooler, then let it drain back under gravity into the kettle, then pump some more even warmer water and let it drain, etc., thus heating my cooler more gradually rather than just dumping really hot water into a cold cooler. I know the drain back works, because I've tried it with cold water, but haven't tried a hot water test yet. Anyone tried something like this?

 
Reply With Quote
Old 08-28-2010, 03:40 AM   #10
avidhomebrewer
Recipes 
 
Sep 2007
Posts: 2,553
Liked 24 Times on 23 Posts


I have a 5 and a 10 gallon cooler setup that I've had for at least 6 years with no modifications (except a braided line in each). The 5 has warped a tad over the years, but it won't compromise the integrity. The 10 is just fine.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keeping Mash temp during 90min Mash in 5gal Cooler MLT KYB All Grain & Partial Mash Brewing 13 01-30-2013 05:57 AM
Mash Tun Cooler Rafae All Grain & Partial Mash Brewing 7 02-07-2010 04:23 PM
Cooler or Mash Tun. Nostrildamus All Grain & Partial Mash Brewing 17 06-20-2007 03:16 AM
Just so I Have This Right, Using a Cooler as a Mash Tun... RLinNH All Grain & Partial Mash Brewing 6 03-06-2006 01:15 AM
Which Cooler to Mash In? gibfried All Grain & Partial Mash Brewing 2 09-28-2005 05:26 AM


Forum Jump