How important is Mg in my brewing water? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Brew Science > How important is Mg in my brewing water?

Reply
 
Thread Tools
Old 08-26-2010, 03:12 PM   #1
Bil
Recipes 
 
Aug 2007
Rhode Island
Posts: 34


My (limited!) understanding of magnesium in the brewing process is that Mg is required for certain yeast enzymes to function efficiently, and that 10-20 ppm is a good target for my water.

My water report gives me 1 ppm Mg, so I've been adding a few grams of MgSO4 to bring my brewing water up to 10 ppm. This obviously ups my SO4 from about 18 ppm to 55 ppm. I'd like to have the ability to keep the sulfates as low as possible, so my question is whether I can skip the MgSO4 addition or if the Mg contribution is more important than keeping the sulfate level down.

Thanks for the input!


__________________
I'm a Rhode Island Fermentation Technician

 
Reply With Quote
Old 08-26-2010, 06:12 PM   #2
ajdelange
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 8,935
Liked 1371 Times on 1045 Posts


Malt generally contains sufficient magnesium to keep yeast happy so I'd say just don't worry about it. Skip the epsom salts and you should be fine.



 
Reply With Quote
Old 09-07-2010, 12:25 AM   #3
BackAlleyBrewingCo
Recipes 
 
Mar 2009
Toledo, OH
Posts: 85
Liked 1 Times on 1 Posts


Quote:
Originally Posted by ajdelange View Post
Malt generally contains sufficient magnesium to keep yeast happy so I'd say just don't worry about it. Skip the epsom salts and you should be fine.

AJ, can you (or anyone else) expand on this assertion? The conventional wisdom on water adjustment is that you want at least 10ppm of Mg; I have to infer from this that there isn't enough (generally) in the malt alone. Is that not true?

So, is there any bare minimum amount of Mg or Ca you need in your water for optimal yeast performance?

Thanks,

TD
__________________
In Primary:
Aging: Tripel
Drinking: Maibock Ale, Amarillo IPA, Irish Red

 
Reply With Quote
Old 09-07-2010, 12:42 PM   #4
ajdelange
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 8,935
Liked 1371 Times on 1045 Posts


According to Briggs in Malts and Malting malt is typically .13% magnesium. So if you put 454 grams (a pound) of malt in 3.78 L (a gallon) of water you would have 454*(.13/100)/3.78 = 0.156 grams per liter of liquor i.e. about 150 mg. Not all of this would be available nor is 0.13% the exact content of all malts but it's clear that it's plenty relative to a 10 ppm requirement.

As anecdotal evidence I offer that I brew with almost completely magnesium free water and my ferments are fine. That's not to say that you can't add a bit of magnesium to low Mg water if you want to. Magnesium does not generally have positive flavor effects (bitter) and as the common salt is the sulfate that means additional sulfate as well. To add 10 mg/L Mg++ you'd also add 42.3 mg/L sulfate if you use epsom salts. That's way more sulfate than I want in my beers (but other brewers like lots more).

Reason: Afterthought

 
Reply With Quote
Old 09-07-2010, 04:55 PM   #5
BackAlleyBrewingCo
Recipes 
 
Mar 2009
Toledo, OH
Posts: 85
Liked 1 Times on 1 Posts


AJ, thanks for the clarification.


__________________
In Primary:
Aging: Tripel
Drinking: Maibock Ale, Amarillo IPA, Irish Red

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using R/O water for brewing. Tmeister Brew Science 52 02-11-2011 03:28 PM
Brewing with well water. blkandrust Brew Science 14 10-04-2010 08:47 PM
How is my tap water for brewing? jlarsen625 Brew Science 2 05-28-2010 02:06 AM
pH and Brewing Liquor (water treament and brewing salts) TheChemist Brew Science 22 07-06-2009 06:31 PM
brewing water adjustments jeepmarine71 Brew Science 7 06-10-2009 05:54 PM


Forum Jump