OK to drill holes in the side of this fridge - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > OK to drill holes in the side of this fridge

Reply
 
Thread Tools
Old 08-26-2010, 01:38 AM   #1
fatguy-littlecoat
 
fatguy-littlecoat's Avatar
Recipes 
 
Oct 2009
Raleigh,NC
Posts: 154
Liked 1 Times on 1 Posts



i want to drill 2 holes into the fresh food side of this fridge.. Im not finding anything in the manual or diagrams that shows anything pertinent in the wall.. would it be ok to do this? its a GE GSL25JFPABS appears to be about 7 or so years old.

http://www.partselect.com/AdvancedMo...Num=&fkMfgID=2

http://products.geappliances.com/Mar...e=49-60458.PDF


tia for any advice.

 
Reply With Quote
Old 08-26-2010, 01:44 PM   #2
rhoadsrage
HBT_SUPPORTER.png
 
rhoadsrage's Avatar
Recipes 
 
Mar 2010
Chicago
Posts: 295
Liked 16 Times on 10 Posts


Quite a while ago, I read a blog about spraying a mist of water on the outside of the fridge and you could see where the coolant coils were. Then you could drill in between the coils. I can't find the article again but someone else might have actually tried it?

 
Reply With Quote
Old 08-26-2010, 02:22 PM   #3
fatguy-littlecoat
 
fatguy-littlecoat's Avatar
Recipes 
 
Oct 2009
Raleigh,NC
Posts: 154
Liked 1 Times on 1 Posts


hey thanks for the info... i think im going to go for it...

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Side by side fridge Kegerator ArtVandelay Kegerators & Keezers 3 06-16-2010 05:03 AM
Side by side fridge/freezer as kegerator ArtVandelay Kegerators & Keezers 2 05-13-2010 01:42 PM
Drill hole in side of standard refrigerator? ipscman Kegerators & Keezers 6 05-04-2009 03:19 AM
What size holes to drill? IBUPIMP Kettles, Mash Tuns & Hot Liquor Tanks 2 04-25-2009 04:08 PM
1939 Kelvinator - side drill? Natron008 Kegerators & Keezers 6 03-16-2009 05:07 PM


Forum Jump