refractometer inconsistent - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > refractometer inconsistent

Reply
 
Thread Tools
Old 08-25-2010, 01:58 PM   #1
TheMan
HBT_SUPPORTER.png
 
TheMan's Avatar
Recipes 
 
May 2009
Illinois
Posts: 3,045
Liked 340 Times on 252 Posts



When taking my pre-boil gravity with my refractometer it's never consistent. For example last night I took 5 samples:

1st = 9.5 Brix
2nd = 10.5 Brix
3rd = 12 Brix
4th = 15 Brix
5th = 12 Brix

What gives? I ensure that the entire tip of the window is covered with wort when the flap is down.

Any help is appreciated.

 
Reply With Quote
Old 08-25-2010, 02:36 PM   #2
pjj2ba
Look under the recliner
HBT_LIFETIMESUPPORTER.png
 
pjj2ba's Avatar
Recipes 
 
Jul 2006
State College, Pennsylvania
Posts: 3,379
Liked 206 Times on 167 Posts


Small hot samples will evaporate very quickly. I ran into this when I first got mine. Because the sample is so small, if even a small amount of evaporation occurs in the time it takes to put the sample on and lower the cover it can have a big affect (and variable too) on the reading.

It is better to take a bigger sample, let it cool, and then take a small bit to measure
__________________
On Tap: Doppelbock O'fest, Pale Ale, cider
Kegged and Aging/Lagering: CAP, Ger. Pils, OKZ (std Amer. lager), CZ Pils, Amer. Wheat, Rye IPA, Saison
Secondary:
Primary: Ger Pils, CAP
Brewing soon: Pale lager, Amer. wheat
Recently kicked : (
Pilsner Urquell Master Homebrewer
(1st NYC 2011, 2nd NYC 2012)
P U crowns winners in its inaugural master HB competition

 
Reply With Quote
Old 08-25-2010, 02:46 PM   #3
JVD_X
HBT_LIFETIMESUPPORTER.png
 
JVD_X's Avatar
Recipes 
 
Jan 2008
Gainesville, Virginia
Posts: 1,478
Liked 4 Times on 4 Posts


You also need to make sure that their are no air bubbles in the sample or debris on the glass.
__________________
- JVD_X

 
Reply With Quote
Old 08-25-2010, 09:12 PM   #4
TheMan
HBT_SUPPORTER.png
 
TheMan's Avatar
Recipes 
 
May 2009
Illinois
Posts: 3,045
Liked 340 Times on 252 Posts


Ok, that I can do. I made sure to get rid of air bubbles and debris. But maybe Pjj2ba's ideas are my issue. Thanks!

 
Reply With Quote
Old 08-25-2010, 11:00 PM   #5
RiverCityBrewer
 
RiverCityBrewer's Avatar
Recipes 
 
Dec 2009
Cincinnati, OH
Posts: 820
Liked 32 Times on 28 Posts


I also found that the temperature of the refractometer itself can skew readings. I keep mine in the garage out of the sun in the summer and inside where its warm in the winter. I only get it right when I'm about to take a reading. I read somewhere that when they say Automatic Temp Correcting it means for the ambient temp of the device itself, not the sample on the glass. So if yours is an ATC model that is from 50-80F that means it needs to be in that temp range to get a correct reading. Here in Ohio we have about 3 days a year that fall within that range, the rest are higher or lower and I'm guessing that in Illinois you are about the same way :-)

 
Reply With Quote
Old 08-26-2010, 03:29 PM   #6
TheMan
HBT_SUPPORTER.png
 
TheMan's Avatar
Recipes 
 
May 2009
Illinois
Posts: 3,045
Liked 340 Times on 252 Posts


Yeah I read that too. And I also only get the refractometer out right when I'm to use it. I'll let you guys know sometime next week if I get it to read stable. I'll be brewing something.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best Value in a Refractometer? jim4065 Equipment/Sanitation 15 05-05-2010 04:23 AM
Refractometer briewer2 Equipment/Sanitation 2 12-09-2009 04:43 PM
Refractometer FG avaserfi Equipment/Sanitation 6 04-13-2009 05:18 PM
Refractometer akamatt Equipment/Sanitation 15 08-08-2008 08:51 PM
Do you like your refractometer? Gabe Equipment/Sanitation 10 05-22-2008 06:56 AM


Forum Jump