Spike Brewing Giveaway - New v3 Kettle

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > Mini Mash Tun
Thread Tools
Old 08-23-2010, 03:40 AM   #1
Feedback Score: 0 reviews
Join Date: Jul 2010
Location: Wilsonville, OR
Posts: 301
Liked 2 Times on 2 Posts
Likes Given: 19

Default Mini Mash Tun

Thought I'd share my latest creation.
The igloo ball valve rubber tubing and and 1/4 nipple I had sitting around my work. I had to buy some SS washers and the copper piece at lowes. I used the stock grommet. I'm using a grain bag (paint strainer from lowes) for now. But with the copper piece I might eventually go with some copper tubing in the bottom. I put it together and used it last night for an oatmeal stout. worked better than I could have hoped for kept the temp spot on for an hour. I actually messed the temps up and had it mashed in at 164 for twenty minutes before I realized I was to high. I put some cold water in and got it to drop to 150 and it stayed that way for anther 40 min. I after I topped of the last time I had like 2.5 gallons of water and 4.5 lbs of grain.

I just wanted to have a signature!
vegas20s is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for a mini-fridge... jasonm17 Kegerators and Keezers 3 01-13-2010 04:50 AM
Partial-Mash Mini-Keg Lauter Tun iamjonsharp Kettles, Mash Tuns, & Hot Liquor Tanks 3 04-28-2009 02:30 PM
mini kegorator hopsoda Kegerators and Keezers 13 02-05-2009 05:33 PM
Mini MLT ideas? bensyverson Kettles, Mash Tuns, & Hot Liquor Tanks 10 02-26-2008 08:18 PM
partial(mini)mash gear allphoto Kettles, Mash Tuns, & Hot Liquor Tanks 0 04-07-2007 06:59 AM

Forum Jump