Kenmore 5.0 for a keezer = tight fit!! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Kenmore 5.0 for a keezer = tight fit!!

Reply
 
Thread Tools
Old 08-22-2010, 09:03 PM   #1
aksea102
Recipes 
 
Jun 2009
South Carolina, lowcountry!
Posts: 91


I have been getting ready to build a keezer for some time now, purchasing faucets, shanks, regulator etc when I had the cash. I recently noticed that Sears has an appliance layaway plan now (in the past appliances werent applicable). Thought this might be a good way to purchase a 5.0cf chest freezer, but not drop the $$ all at once.
So off to Sears I went today, equipped with my corny keg circular cardboard cutouts and a tape measure.
Here's the heads up...crikey, the Kenmore 5.0 would make for an extremely tight fit for two cornies on the floor of that freezer.
Unfortunately I dont have the space for a 7.0+ cf keezer (bye bye layaway plan) so I hit Lowe's up to check out the Holiday 5.0. Much better fit for two cornies on the floor.

This is where I ask for help...I have poured thru keezer build threads and to be honest, I am getting a bit dizzy!! Does anyone have a bookmarked thread for dummies (or in my case, a chick without tons of tools, or DIY knowledge)? I definitely want to build a collar but attach it to the lid. The less height I have to clear, the better...and safer!!

Thanks in advance-
__________________
Quote:
Originally posted by YooperBrew:

"Don't assume I want a flippin' wheat beer because I have breasts."

 
Reply With Quote
Old 08-22-2010, 09:18 PM   #2
TomSD
Da Geek
HBT_LIFETIMESUPPORTER.png
 
TomSD's Avatar
Recipes 
 
Aug 2010
Lemon Grove, CA, CA
Posts: 1,361
Liked 33 Times on 24 Posts


http://www.homebrewtalk.com/f51/keez...ine-way-99753/

Is a good start.
__________________

Johnson Controller rewire
| Keezer (FCM7SUWW) build | Love Controller box build | Soda Syrups/Concentrates

God is an imaginary friend for grownups., Walter Crewes (Morgan Freeman), The Big Bounce

Don't be afraid to ask dumb questions they're easier to handle than dumb mistakes!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kenmore 8.8 cu ft on sale slakwhere Fermenters 12 01-23-2010 03:33 AM
Kenmore 7.2 Keezer problem dirt55 Kegerators & Keezers 16 08-07-2009 08:24 PM
Tight SS ball valves samc Kettles, Mash Tuns & Hot Liquor Tanks 15 06-08-2009 04:40 AM
How many cornies in a 13 cu ft kenmore? RBChallenger Kegerators & Keezers 3 02-13-2009 04:38 PM
Kenmore wiring problem jager Kegerators & Keezers 7 03-20-2007 06:16 PM


Forum Jump