Banjo burner - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Banjo burner

Thread Tools
Old 08-19-2010, 05:29 PM   #1
Aug 2010
Newtown, PA
Posts: 23

Question, I have a bayou classic banjo burner, the manufacturer claims it cannot be used with natural gas. Blichmann has a floor and the top tier burner that is the same burner and has the natural gas conversion kit, which is just the natural gas orifice. I installed this on the banjo burner and no problems. 10 gal hose water about 65 degrees to boil in 40 min. So what is the deal with all the other banjo burners out there that "cannot be converted for natural gas"? My grill is a dual fuel, just change the gas orifice and use NG. You donít change anything else. Anyone else do this or am I the only one?

Reply With Quote
Old 08-19-2010, 07:22 PM   #2
Registered User
Feb 2009
Marlton, NJ
Posts: 157
Liked 2 Times on 2 Posts

yep, its common around here to use the "cannot be converted for natural gas" banjo's for natty gas....I just drilled out the orifices a little at a time till the flame looked good

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
cheap banjo burner? bendavanza Brew Stands 5 02-09-2011 01:58 PM
Banjo Burner differences? Pintodave Brew Stands 3 06-13-2010 02:15 PM
jet/banjo burner quality shanepaynter Brew Stands 2 01-11-2010 01:36 PM
banjo burner POLISHALE Brew Stands 15 04-13-2009 02:51 AM
10" Banjo Burner Dwain Brew Stands 1 03-08-2009 07:20 AM

Forum Jump