Blichmann Hopblocker Modification - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Blichmann Hopblocker Modification

Thread Tools
Old 08-16-2010, 11:07 AM   #1
Apr 2009
Posts: 19

Has anybody made a successful modification on the blichmann hopblocker? I want to use one in my brew kettle, but i measured out my spigot and it is slightly too low to install. It seems like I could simply cut about a 1/2 inch off the bottom of the blocker. Does anybody have any thoughts if this is a possibility? Thanks for the help

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Thermostat Modification for Fermentation Chamber Lunarpancake Fermenters 3 12-10-2009 03:51 AM
Seeking help on Sanyo 4912 modification. ScarySouthernMan Kegerators & Keezers 0 11-07-2009 11:05 PM
Rubbermaid/Igloo HLT Modification Snafu Kettles, Mash Tuns & Hot Liquor Tanks 2 09-25-2009 10:55 PM
Immersion Chiller Modification? jtucker101 Chillers & Stir Plates 13 04-04-2009 03:31 PM
hang-on-pot whirlpool needs modification nathan Kettles, Mash Tuns & Hot Liquor Tanks 0 02-19-2009 03:04 PM

Forum Jump