CO2 Regulator Parts - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > CO2 Regulator Parts

Reply
 
Thread Tools
Old 08-14-2010, 08:07 PM   #1
mmurray
Recipes 
 
Nov 2009
Internet
Posts: 327
Liked 9 Times on 7 Posts



Not sure this is in the right place... if not Please move MOD's... thanks.

I have 2 regulator, one has Right hand treads at all points and the other has Left hand threads on the high pressure inlet and outlets.

I am currently looking for new stems for both that have the O-ring built into the face of the stem where it is attached to the tank.

Here is an image of what I am talking about:


I purchased 2 of these stems from www.kegkits.com but when I received them they were just the same regular stems I already have. I have been trying to contact them for a week and a half now to exchange them for the correct stems that they have advertised on thier web site, but have not had any response as of yet!

So... if any of you know of another site or location that I can contact about buying the stems with the integral o-rings I would appreciate it very much!

Cheers,

Mark
__________________
“God bless Homebrewing Beer. There are many things a man can do with his time. And this, is better than those things.”

Gulf Coast Brewers League

 
Reply With Quote
Old 08-14-2010, 08:31 PM   #2
marzsit
Recipes 
 
Sep 2009
kent, wa.
Posts: 316
Liked 6 Times on 6 Posts


left-hand threads are common on fuel gas regulators used for welding.

 
Reply With Quote
Old 08-14-2010, 09:06 PM   #3
dogtailale
Recipes 
 
Jul 2010
puget sound
Posts: 203

I dont know but the last place I would look for the parts you want is your LOCAL welding (gas) supply shop.

 
Reply With Quote
Old 08-16-2010, 09:40 PM   #4
mmurray
Recipes 
 
Nov 2009
Internet
Posts: 327
Liked 9 Times on 7 Posts




OK.... It took a bit of digging and e-mailing, but just incase anyone else was looking for these parts I found a location that has them.

Below is the link for the Left Hand Thread...
http://soda-dispensers.com/Merchant5...Category_Code=


And here is the link for the Right Hand Thread...
http://soda-dispensers.com/Merchant5...Category_Code=

Cheers!
__________________
“God bless Homebrewing Beer. There are many things a man can do with his time. And this, is better than those things.”

Gulf Coast Brewers League

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
GR Style Regulator Parts Needed TRainH2o Bottling/Kegging 5 05-23-2014 07:09 PM
What parts do I need to keg? eatpuppies Bottling/Kegging 13 05-19-2009 08:25 PM
is co2 regulator the same as a beergas regulator? bkov Bottling/Kegging 4 04-15-2009 03:32 AM
what parts will i need? benpen Bottling/Kegging 1 07-25-2008 07:56 PM
Keg parts nitrousjunkie Bottling/Kegging 3 06-01-2008 04:45 PM


Forum Jump