Changing from IC to CFC..... - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Changing from IC to CFC.....

Reply
 
Thread Tools
Old 08-12-2010, 05:17 PM   #1
Bass0721
HBT_LIFETIMESUPPORTER.png
 
Bass0721's Avatar
Recipes 
 
Nov 2008
Brookfield, Massachusetts
Posts: 119
Liked 15 Times on 10 Posts



Well, I have been playing around with changing to a CFC rather than my IC. I built it and have it sitting here next to me...taunting me. I recently started to increase my production to 15 gal runs and my IC takes too much time. Last night I prepared my grain bill and did all my grinding. I also started my yeast last night. When Get home i will sanitize everything and then begin the birth my my new recipe.....Vanilla Pale. If all goes well, this should turn out to be a great recipe. the only thing I'm not really sure of is the size of the tubing to connect to the CFC from the wort, and the type of connection I will need. Hopefully I have everything.

I'll let you all know how it goes.

Kris



 
Reply With Quote
Old 08-12-2010, 05:29 PM   #2
DustinHickey
Recipes 
 
Mar 2010
Long Island NY
Posts: 290
Liked 3 Times on 3 Posts


I use 3/8" inside diameter silicone tubing and slide it over the 3/8" copper tubing on the CFC and tighten with a pipe clamp.

I pump from the ball valve on my kettle up to my CFC and then out to the fermentor through a venturi fitting for aeration. Works like a charm with no leaks.

Keep in mind I use March 809 producing 12' of head. If you use something that produces more pressure you may want to use some type of barb fitting w/ clamps, ect..

 
Reply With Quote
Old 08-12-2010, 05:40 PM   #3
Bass0721
HBT_LIFETIMESUPPORTER.png
 
Bass0721's Avatar
Recipes 
 
Nov 2008
Brookfield, Massachusetts
Posts: 119
Liked 15 Times on 10 Posts


Thanks Dustin, I have the same pump so I'll try that. I think i have 3/8" at home.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing Coolers and Efficiency thevalkrye All Grain & Partial Mash Brewing 12 01-29-2010 11:51 PM
Does my efficieny suck? ..... or have i been short changing myself? SamuraiSquirrel All Grain & Partial Mash Brewing 4 01-23-2010 01:35 AM
changing recipe volume strangebruer All Grain & Partial Mash Brewing 2 12-05-2009 08:24 PM
changing receipe boostn All Grain & Partial Mash Brewing 4 06-26-2006 04:26 AM
thinking of changing mash/lauter tun "strainer" Steve973 All Grain & Partial Mash Brewing 3 04-05-2006 07:40 PM


Forum Jump