Johnson a419 probe issue - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Johnson a419 probe issue

Thread Tools
Old 08-08-2010, 12:40 AM   #1
Oct 2009
w sac
Posts: 4

Just wired up my new johnson a419. It appears to be working. When it powers on it flashes C03, then flashes 212F asd. It then cycles the power and flashes SF OP. The wiring guide say its a probe failure being open. Anyone deal with this before. I have the probe wired to sen and com posts. Any help would be great.


Reply With Quote
Old 12-24-2013, 08:18 PM   #2
Aug 2013
Posts: 22
Liked 2 Times on 2 Posts

I have the exact same problem. Although the controller was functioning fine in cooling mode and then switched to heating mode and am having the same issue.

You ever figure out how to correct the issue?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Johnson A419, Freezer and Thermowell Help schweaty Equipment/Sanitation 23 01-09-2016 08:18 PM
Where to buy Johnson A419 temperature controller alexavery Equipment/Sanitation 15 09-09-2010 06:27 PM
Johnson A419 pre-wired? BrettV Equipment/Sanitation 4 06-30-2010 09:35 PM
Johnson Controls A419 Probe Dan2539 Equipment/Sanitation 1 12-07-2009 09:02 AM
Johnson Controls A419: Big Difference? piperbrew Equipment/Sanitation 6 08-05-2009 07:24 PM

Forum Jump