1/2" SS cam and groove camlocks in stock. - Home Brew Forums

Register Now!
Home Brew Forums > Sponsor Showcase > Sponsor Showcase > 1/2" SS cam and groove camlocks in stock.

Reply
 
Thread Tools
Old 08-05-2010, 09:28 PM   #1
BargainFittings
Sponsor
HBT_SPONSOR.png
 
BargainFittings's Avatar
Recipes 
 
Nov 2008
Allen TX
Posts: 2,030
Liked 88 Times on 78 Posts



We now have Stainless steel quick disconnects!

We will carry the following parts:

Type F - Male x 1/2" NPT male
Type C - Female x 1/2" Male hose barb
Type D - Female x 1/2" Female NPT

I also have FDA food grade silicone gaskets on the site for $1.00 each.


 
Reply With Quote
Old 08-05-2010, 10:32 PM   #2
ScubaSteve
HBT_SUPPORTER.png
 
ScubaSteve's Avatar
Recipes 
 
May 2007
New Bern, NC
Posts: 3,677
Liked 83 Times on 57 Posts


Awesome. Good job listening to your customers and tracking the trends! I'd buy from you, but I'm going with 3/4".......

 
Reply With Quote
Old 08-05-2010, 10:43 PM   #3
Yambor44
HBT_LIFETIMESUPPORTER.png
 
Yambor44's Avatar
Recipes 
 
Nov 2008
Ocala Florida
Posts: 2,108
Liked 84 Times on 56 Posts


I want to get some of these but can't wrap my head around the difference between these and the standard QD's (brass) I use now? 3/8" I think? Not knocking these, I think they are awesome, just need someone to sell me on them!

 
Reply With Quote
Old 08-05-2010, 10:52 PM   #4
klyph
Recipes 
 
Dec 2009
North Pole, Alaska
Posts: 1,809
Liked 41 Times on 37 Posts


Quote:
Originally Posted by Yambor44 View Post
I want to get some of these but can't wrap my head around the difference between these and the standard QD's (brass) I use now? 3/8" I think? Not knocking these, I think they are awesome, just need someone to sell me on them!
Ya, the McMaster Brass QDs are 3/8" and well, brass. These look to be about the same cost, but with less restriction and better material.
__________________
10 gallon electric system
Stovetop 110v single vessel 5 gallon system

Primary: saison
Secondary: nada
Conditioning: macaroon stout
Drinking: store bought

 
Reply With Quote
Old 08-05-2010, 11:08 PM   #5
BargainFittings
Sponsor
HBT_SPONSOR.png
 
BargainFittings's Avatar
Recipes 
 
Nov 2008
Allen TX
Posts: 2,030
Liked 88 Times on 78 Posts


A different style of disconnect. I switched out my brass disconnects when I discovered these and I'm happy with them. Happy enough to start selling them.

 
Reply With Quote
Old 08-05-2010, 11:12 PM   #6
Yambor44
HBT_LIFETIMESUPPORTER.png
 
Yambor44's Avatar
Recipes 
 
Nov 2008
Ocala Florida
Posts: 2,108
Liked 84 Times on 56 Posts


Thanks guys. What would be the best hose to use? I have purchased the silicone 3 different times from 3 different vendors and it just doesn't seem to be thick enough.

 
Reply With Quote
Old 08-05-2010, 11:15 PM   #7
jwright
Recipes 
 
Jan 2009
Maryland
Posts: 199
Liked 5 Times on 5 Posts


ScubaSteve,

What are you planning to do about the gaskets for the 3/4" fittings? BobbyM was right - these things are much bigger than the 1/2" size.

I have a 3/4" camlock that I bought some #317 silicone o-rings from o-rings and more. The OD of the oring is a bit on the small side. It still seems to be retained by the internal groove - I can't shake it out, but I have not brew tested it yet.

Curious if you had another idea.

Jason

 
Reply With Quote
Old 08-06-2010, 12:45 AM   #8
Yambor44
HBT_LIFETIMESUPPORTER.png
 
Yambor44's Avatar
Recipes 
 
Nov 2008
Ocala Florida
Posts: 2,108
Liked 84 Times on 56 Posts


Do they make a female with male npt threads to add an elbow like in Bobby's video?

 
Reply With Quote
Old 08-06-2010, 02:13 AM   #9
BargainFittings
Sponsor
HBT_SPONSOR.png
 
BargainFittings's Avatar
Recipes 
 
Nov 2008
Allen TX
Posts: 2,030
Liked 88 Times on 78 Posts


Quote:
Originally Posted by Yambor44 View Post
Do they make a female with male npt threads to add an elbow like in Bobby's video?
Yes they do. I do sell a street elbow to do the same thing with the type D

http://www.bargainfittings.com/index...product_id=120

 
Reply With Quote
Old 08-06-2010, 03:14 AM   #10
kegtoe
HBT_LIFETIMESUPPORTER.png
 
kegtoe's Avatar
Recipes 
 
Sep 2009
Stevens Point, Wisconsin
Posts: 1,200
Liked 18 Times on 17 Posts


wish you had these before i bought my poly sulfs disconnects - damn you!!!!

Just kidding, i love your stuff.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Updated website - Weldless Fittings back in stock. BargainFittings Sponsor Showcase 33 04-14-2010 02:42 PM


Forum Jump