Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > I think of messed up on force carb? help please
Reply
 
Thread Tools
Old 08-01-2010, 06:10 PM   #1
shamby
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: GA
Posts: 29
Default I think of messed up on force carb? help please

I'm knew to kegging and just messed up bid time I think. I force carb at 12psi for 10 days in the fridge at 40 degrees and now all I have is foam. I did not realize that you should let them set and forget at room temp. Is there a fix for this?
Thanks

40 degrees
6 feet of 3/16 hose.

Scott


shamby is offline
 
Reply With Quote
Old 08-01-2010, 06:34 PM   #2
marubozo
I can has homebrew?
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
marubozo's Avatar
Recipes 
 
Join Date: May 2009
Location: SW Michigan
Posts: 30,728
Liked 5379 Times on 5235 Posts
Likes Given: 223

Default

Actually, you did it the right way. You want to set and forget at serving temps, at serving psi for a few weeks, ideally.

The hose length doesn't seem too far off, either. Here's a handy calculator if you haven't downloaded it already: http://www.homebrewtalk.com/attachme...calculator.zip

But basically, at 40 degrees and 12 psi, it seems like you're right in the ballpark with a 6 foot line. Are you sure you didn't set the pressure higher initially for a few days and then just dialed back the regulator to 12? To make sure you're really at 12 psi you may want to try purging the gas from the keg and then hooking it back up at 12 and try serving again.

Also, I know this may sound silly, but are you sure the gas and liquid are connected to the right posts? We had someone on here just a few weeks ago who tried everything and could get nothing but foam but realized the connections were reversed. Even if the hoses look to be correct, check to make sure the post with the dip tube is really where your beer line is connected, even if it's on the 'out' side of the keg.

Anyway, it doesn't look like you've done anything wrong, so those are a few things to check first.


marubozo is offline
 
Reply With Quote
Old 08-01-2010, 06:35 PM   #3
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: UP of Michigan
Posts: 65,146
Liked 5940 Times on 4235 Posts
Likes Given: 1516

Default

Quote:
Originally Posted by shamby View Post
I'm knew to kegging and just messed up bid time I think. I force carb at 12psi for 10 days in the fridge at 40 degrees and now all I have is foam. I did not realize that you should let them set and forget at room temp. Is there a fix for this?
Thanks

40 degrees
6 feet of 3/16 hose.

Scott
That seems about right- my kegerator is at 39 degrees and 12 psi. At room temperature, you'd need about 30 psi for the same carb level. With 6 feet of line, you should have only a little foam. Is it foamy on the first pour, or on all pours? Is the line warm, or in the kegerator with the kegs?
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is offline
 
Reply With Quote
Old 08-01-2010, 06:46 PM   #4
shamby
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: GA
Posts: 29
Default

It's foamy on all pours, then once it settles down in a glass the beer has good flavor but flat. Could I have over carb it, and if so do I just take it off pressure for about a day to resolve.

I checked the hose and they are correct.

I also purged the tank several times.

Thank for the post.
shamby is offline
 
Reply With Quote
Old 08-01-2010, 06:51 PM   #5
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: UP of Michigan
Posts: 65,146
Liked 5940 Times on 4235 Posts
Likes Given: 1516

Default

Hmmm. It's almost impossible to believe the beer is overcarbed. Not with those temperatures and psi.

Try this- purge the tank, and reset at 5 psi and pour. See how the carb level is then. If the carb level is ok, that means you need longer lines. If it's still way carbed, then you can take it off the gas for a day or two, and keep purging the headspace.

Are you 100% sure your regulator is accurate? Is it new, or an old one?
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is offline
 
Reply With Quote
Old 08-01-2010, 06:53 PM   #6
marubozo
I can has homebrew?
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
marubozo's Avatar
Recipes 
 
Join Date: May 2009
Location: SW Michigan
Posts: 30,728
Liked 5379 Times on 5235 Posts
Likes Given: 223

Default

The only way you could have overcarbed if the beer was sitting at something more than 12 psi for any extended period of time. Like Yoop, I have three regulators maintaining six kegs, all set between 10-15 psi and with 6-7 foot lines and have never seen a problem with too much carbonation.

Is this the first beer you've kegged, or have you done others without similar problems? Also, what size beer line are you using, and what kind of taps?
marubozo is offline
 
Reply With Quote
Old 08-01-2010, 07:03 PM   #7
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: UP of Michigan
Posts: 65,146
Liked 5940 Times on 4235 Posts
Likes Given: 1516

Default

One last question- where are the lines? If they are in a tower, they may not be cold. That is the biggest issue in my opinion. Warm beer lines will cause foaming, no matter what the carb level is in the beer.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is offline
 
Reply With Quote
Old 08-01-2010, 08:45 PM   #8
shamby
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: GA
Posts: 29
Default

I have a tower, but you can see the foam in the lines from the keg. My beer lines are 3/16 and I'm assuming my regulator is good. I used it for domestic kegs before kegging my one. This is my seconded attemp to keg. The first one was a bust also. At first everything was good, but I had the temp to low on the fridge and the beer inside the keg froze. After that it turned flat and I'm trying to recarb it now, but not much luck. I'm kinda at a loss. Thanks again
shamby is offline
 
Reply With Quote
Old 08-01-2010, 10:30 PM   #9
skx
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: oregon
Posts: 30
Default

maybe a bad o-ring on the dip tube or post are sucking in air?
skx is offline
 
Reply With Quote
Old 08-02-2010, 12:23 AM   #10
shamby
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: GA
Posts: 29
Default

Stupid question, but where is the o ring on the dip tube? The don't think the beer is over carb, but I still can't understand why it's all foam..


shamby is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Force carb Brentk14 Bottling/Kegging 18 08-29-2013 03:41 AM
How about a vote: force carb or natural carb in keg jaginger Bottling/Kegging 14 07-03-2012 04:07 AM
force carb vs. natural carb BrewDey Bottling/Kegging 17 01-10-2011 02:57 AM
My First Force Carb Filter Bottling/Kegging 8 04-26-2008 04:31 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS