Is this good enough for a 10gal system? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Is this good enough for a 10gal system?

Thread Tools
Old 07-24-2010, 08:47 PM   #1
Aug 2009
Charlottesville, VA
Posts: 2,174
Liked 44 Times on 40 Posts

-20psi regulator, hard lined to three burners
-each burner is one of the 70k btu banjo burners from agri supply

I don't want to wait forever to get 10gal to boil, but I also don't want to waste a ton of propane... does this strike a good balance?

I'm not sure what type of valves I want to install in the gas lines to adjust the flow rate. Got suggestions?

Reply With Quote
Old 07-25-2010, 12:49 AM   #2
HalfPint's Avatar
Oct 2009
Posts: 1,771
Liked 13 Times on 12 Posts

Well, this will burn a bit of propane, but I imagine you'll be able to get around 3 batches of brew out of each propane tank.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
5gal FB in a 10gal justin81 Equipment/Sanitation 3 10-20-2009 06:39 PM
Is this microbrewery system a good deal? SafariBrew Equipment/Sanitation 12 08-25-2009 11:05 PM
new kegging system and kegerator setup! good and bad rcm_rx7 Equipment/Sanitation 4 06-21-2009 07:09 PM
Do I need a 5gal or 10gal cooler? cootr_brn Equipment/Sanitation 13 06-13-2009 01:27 PM
Is this a good kegging system. Brewer_Chad Equipment/Sanitation 7 12-27-2007 01:03 AM

Forum Jump