Am I giving the right advice here? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Am I giving the right advice here?

Thread Tools
Old 07-09-2010, 05:04 PM   #1
Aug 2009
Los Angeles, California
Posts: 508
Liked 6 Times on 6 Posts

I got a buddy into brewing and he immediately tried a high gravity beer as his second batch. (I think OG was around 1.08 or something.) Skip to a few months later and he is pretty disappointed because the batch has a strong fusel taste. (The beer has a strong estery taste with a pretty intense fusel finish. It is solventy, coats the throat, and won't go away.) I went back over his process with him and think I've found the culprit. Wanted to get a second (or third or fourth) opinion, though.

Basically, I think he pitched way too hot. He was using a Belgian strain (he forgets which one, but remembers it mentioned "Abbey" in the title; my guess is WLP530) and is confident that it was rated for the high 70s. He pitched two smack packs at the time, but remembers the kettle still being slightly warm when he pitched. (My guess is the wort was in the 90s.) His actual fermentation was in the high 60s to mid 70s, and he racked to a secondary (which I lent him) after three weeks. About five weeks in secondary at ambient temperatures (~72) and then into the bottles.

My thought is the fusels developed in those first few hours when the wort was too hot. I don't think he under-aerated because he poured the "cooled" wort into the fermenter through a strainer. I also think he had enough yeast since he used two smack packs (although I told him a starter next time would be a good idea). Anyone think there is something else I might be missing here? It seems the two most common fusel creators--under aeration and insufficient yeast--can be ruled out.

Reply With Quote
Old 07-09-2010, 05:14 PM   #2
Jan 2009
Helotes, TX, TX
Posts: 44

I'd say your on the right track...pitching at a warm temp would be the culprit. When I started the info was to not even think about pitching until <80F or you would kill off most strains.
Get this guy a CFC.

Reply With Quote
Old 07-09-2010, 06:06 PM   #3
May 2010
Leadville, CO
Posts: 557
Liked 14 Times on 13 Posts

Two smack packs in a 1.080 beer would only be about half the recommended pitching rate anyway. Combine that with hot fermentation and he's pretty much just trying to generate fusels. Even for beers I plan to ferment warm, I like to pitch in the low 60s.

The good news is that he's bottle conditioning. If he leaves them at room temperature the yeast will probably metabolize some of the fusels and turn them into esters, and the beer should get better over time.
Originally Posted by monty3777 View Post
squeeze your sack like it owes you money.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stuck Fermentation? Help/Advice alaskajoe Fermentation & Yeast 5 05-24-2010 10:34 PM
I Need Help/advice ILOVEBEER Fermentation & Yeast 6 12-08-2009 03:19 AM
Advice on finishing a big RIS Rottnme Fermentation & Yeast 9 11-25-2009 02:40 AM
Any advice on efficiency Recusit8m Fermentation & Yeast 6 09-30-2009 10:47 PM
Giving dry yeast a 2nd chance cobalt60 Fermentation & Yeast 3 08-31-2009 11:25 AM

Forum Jump