My First IIPA - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > My First IIPA

Reply
 
Thread Tools
Old 07-09-2010, 04:47 AM   #1
aMillionDreams
Recipes 
 
Jun 2010
Louisville, KY
Posts: 88
Liked 2 Times on 2 Posts



What do you all think? Is it too many hops? An online calculator told me it'd be around 134 IBU and that was without the dry hopping. It's basically an amalgam of my two favorite IIPAs Hopslam and dfh 90min.

5 gallon batch

10 pounds plain light dry malt extract
1 lb Crystal Malt 40
8oz two row Pale Malt
2 lbs Honey

1 oz Simcoe (continuous hopping)
2 oz Centennial(continuous hopping)
1 oz Magnum(continuous hopping)

1 oz Amarillo(flame out)

0.5 oz Centennial (dry hop)
1oz Citra (dry hop)

White labs WLP001 (California Ale) or Wyeast 1056 (American Ale)

2/3 cup priming sugar


__________________
On deck: Pliny the Elder, Heather Ale
Fermenting: Strawberry Melomel, Imperial Belgian White, Pumpkin Ale
Carboy #1: Cream Ale
Carboy #2: Hoptoberfest
Carboy #3: Raspberry Melomel
Tap #1: Two Hearted Clone
Tap #2: Spiced Bourbon Stout
Tap #3: Raison D'Etre Clone
Bottled: Belgian Trippel, NB Farmhouse Saison Ale, Apfelwein, Duvel Clone, Oatmeal Stout, Joe's Ancient Orange Mead, JABM (Blackberry)

 
Reply With Quote
Old 07-09-2010, 04:53 AM   #2
TimBrewz
Recipes 
 
Feb 2008
Portland, OR
Posts: 666
Liked 55 Times on 44 Posts


Looks pretty good. Maybe too much crystal?, Could be too sweet. I us 8 oz C40 in my IIPA and it seems about right- though the honey may dry it out enough? I would also increase the dry hops to at least 3 oz for a IIPA. Nice hop bill, I like and use all of those hops in big IPAs. Simcoe makes a great dry hop too.

Good luck



 
Reply With Quote
Old 07-09-2010, 04:57 AM   #3
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2009
Los Angeles
Posts: 8,163
Liked 481 Times on 389 Posts


Is the 1/2 pound of pale malt going to be mashed?

It looks like you basically wrote an extract recipe with steeping grains, except you can't really steep two row like that.

And if it's supposed to be a partial mash, I have to ask why you are only mashing 8oz and using DME for the rest. You could sub out a lot more of the DME for 2-row and save lots of money on the recipe.


EDIT:

To clarify, steeping is technically mashing, but you really want to be careful of the temperature you mash at, and it doesn't make sense to me to only mash 8oz.


 
Reply With Quote
Old 07-09-2010, 05:05 AM   #4
aMillionDreams
Recipes 
 
Jun 2010
Louisville, KY
Posts: 88
Liked 2 Times on 2 Posts


I was going to steep the grains like an extract with specialty grains. I thought I had used 2row before like that. Hmm...
__________________
On deck: Pliny the Elder, Heather Ale
Fermenting: Strawberry Melomel, Imperial Belgian White, Pumpkin Ale
Carboy #1: Cream Ale
Carboy #2: Hoptoberfest
Carboy #3: Raspberry Melomel
Tap #1: Two Hearted Clone
Tap #2: Spiced Bourbon Stout
Tap #3: Raison D'Etre Clone
Bottled: Belgian Trippel, NB Farmhouse Saison Ale, Apfelwein, Duvel Clone, Oatmeal Stout, Joe's Ancient Orange Mead, JABM (Blackberry)

 
Reply With Quote
Old 07-09-2010, 05:10 AM   #5
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2009
Los Angeles
Posts: 8,163
Liked 481 Times on 389 Posts


Well if you keep it between 150 and 160 it should be OK, but really you ought to mash it properly. Crystal you can steep no problems.

 
Reply With Quote
Old 07-09-2010, 05:16 PM   #6
TheBulge
Recipes 
 
Dec 2008
Baltimore
Posts: 19

I think this is a good start. As previously mentioned, the 2row is not needed for steeping.
I would save a few bucks and replace the honey with cane sugar. I donít think the delicate honey flavor/aroma will show in an IIPA.
134 ibu's are great but I would rerun those calculations. 4oz of boil hops just doesn't seem like much for this style.

 
Reply With Quote
Old 07-09-2010, 05:40 PM   #7
Oldsock
Recipes 
 
Sep 2007
DC, Washington DC
Posts: 3,231
Liked 252 Times on 167 Posts


Quote:
Originally Posted by TheBulge View Post
4oz of boil hops just doesn't seem like much for this style.
Agreed, I'd go for a couple ounce of hops at 0, I'd also double the dry hops. It is pretty much impossible to over hop a big IPA.
__________________
Check out The Mad Fermentationist for my adventures in fermentation and my book: American Sour Beers!

 
Reply With Quote
Old 07-09-2010, 05:42 PM   #8
HokieBrewer
Recipes 
 
Sep 2008
Greensboro, NC
Posts: 1,073
Liked 33 Times on 30 Posts


Quote:
Originally Posted by Oldsock View Post
Agreed, I'd go for a couple ounce of hops at 0, I'd also double the dry hops. It is pretty much impossible to over hop a big IPA.
Especially with late additions.

 
Reply With Quote
Old 07-09-2010, 05:42 PM   #9
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2009
Los Angeles
Posts: 8,163
Liked 481 Times on 389 Posts


Yeah I agree if I do 60 minute boil in beersmith with those hops I get around 110 IBU, and that is if they all go in at the beginning of the boil. With continuous hopping it's not going to be nearly that much.

 
Reply With Quote
Old 07-09-2010, 06:17 PM   #10
whatsleftofyou
Third Eye Pried Wide
HBT_LIFETIMESUPPORTER.png
 
whatsleftofyou's Avatar
Recipes 
 
Dec 2007
U.P. of MI
Posts: 643
Liked 16 Times on 16 Posts


Quote:
Originally Posted by aMillionDreams View Post
An online calculator told me it'd be around 134 IBU and that was without the dry hopping.
FYI, dry hops don't add any IBUs.


__________________
My Bar Build
Primary: Sweet stout w/ pink peppercorns, Kriek, American Brown
Secondary: American Barleywine
On Tap: Pumpkin Spice Ale, Coffee Blonde, Belma APA
Bottled: PB&J Sweet Stout, Rhubarb Berliner Weisse


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which IIPA looks better bh10 Recipes/Ingredients 2 05-14-2010 03:48 PM
IIPA help.How does this look??? sub-zero Recipes/Ingredients 10 12-17-2009 01:45 AM
IIPA help TechyDork Recipes/Ingredients 14 06-23-2009 05:32 AM
First IIPA irishod89 Recipes/Ingredients 13 06-05-2009 01:37 PM
IIPA I think MikeFlynn74 Recipes/Ingredients 23 03-08-2008 05:10 PM


Forum Jump