DIY activated charcoal filter? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > DIY activated charcoal filter?

Reply
 
Thread Tools
Old 07-05-2010, 04:41 AM   #1
Spasticteapot
Recipes 
 
May 2010
Madison, WI
Posts: 21


I'd like to build an activated charcoal filter for purifying vodka for use in liqueurs. However, I've run into the rather snarly problem of not being able to use anything that will leech into the alcohol, which does rather heavily limit the materials I can use for construction. As the alcohol needs to pass through the charcoal several times (or needs to pass through a LOT of charcoal), some sort of recirculating design or one working as a siphon to push the alcohol from one chamber to another would be nice.

 
Reply With Quote
Old 07-05-2010, 06:49 AM   #2
Dunerunner
 
Dunerunner's Avatar
Recipes 
 
Jul 2010
Florence, OR
Posts: 795
Liked 15 Times on 14 Posts


Are you worried about evaporation? OK, so the system should be sealed. Why couldn't you modify a cartrige water filter,ala a Randal; for this purpose and move the liquor with a food grade pump?


dongtokes Likes This 
Reply With Quote
Old 07-05-2010, 01:40 PM   #3
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


I see no reason why a filter housing as shown in the previous post would not work. Slightly off topic, but FYI I was discussing the vodka filtering thing with some friends. I had read some stuff about supposedly being able to filter cheap vodka through activated carbon and it would be magically transformed into top shelf vodka. I was promptly informed that this was pure B.S. and had even been debunked by the Mythbuster guys. IOW, you might want to do a little more research on the subject before going forward with this. I'm not a vodka drinker, so I probably could not tell the difference if I did a before and after blind tasting.

 
Reply With Quote
Old 07-05-2010, 02:39 PM   #4
Tiber_Brew
It's about the beer.
HBT_LIFETIMESUPPORTER.png
 
Tiber_Brew's Avatar
Recipes 
 
Apr 2010
Upper Peninsula, Michigan
Posts: 2,443
Liked 223 Times on 159 Posts


You could try looking for SS canisters that are roughly the same dimensions as the plastic filter housings. If you're worried about chemical leaching, the SS should be fine. It might be somewhat costly by the time you've fabricated something out of SS, though, and you might have to evaluate whether or not it's worth it.




In college, my old roommate and I used to filter 5 o'clock vodka through an activated carbon Britta filter. It tasted much better, and back then it was only $4/fifth. It was no Grey Goose, though.

TB
__________________
On tap:
1. American Pale Ale 2. Michigan IPL 3. Helles 4. Kentucky Common 5.[Nitrogen] Oat Blonde
Primary:
1. Oatmeal Stout 2. Oatmeal Stout 3. none 4. none 5. none 6. none
Secondary:
1. Brett Ale 2. none 3. none 4. none 5. none
Bottled:
About 28 gallons of beer & 2.5 gallons of mead
Kegged & conditioning:
Rye Barrel aged DIPA, Helles, Kentucky Common

Current batch #: 227

 
Reply With Quote
Old 07-05-2010, 02:51 PM   #5
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 302 Times on 235 Posts


Quote:
Originally Posted by Tiber_Brew View Post
You could try looking for SS canisters that are roughly the same dimensions as the plastic filter housings. ...
Something like this might work.


 
Reply With Quote
Old 07-05-2010, 04:07 PM   #6
Tiber_Brew
It's about the beer.
HBT_LIFETIMESUPPORTER.png
 
Tiber_Brew's Avatar
Recipes 
 
Apr 2010
Upper Peninsula, Michigan
Posts: 2,443
Liked 223 Times on 159 Posts


Good idea, P-J. That looks like a hopback, is it not? You could easily use that as a filter with just a few modifications if any.

TB
__________________
On tap:
1. American Pale Ale 2. Michigan IPL 3. Helles 4. Kentucky Common 5.[Nitrogen] Oat Blonde
Primary:
1. Oatmeal Stout 2. Oatmeal Stout 3. none 4. none 5. none 6. none
Secondary:
1. Brett Ale 2. none 3. none 4. none 5. none
Bottled:
About 28 gallons of beer & 2.5 gallons of mead
Kegged & conditioning:
Rye Barrel aged DIPA, Helles, Kentucky Common

Current batch #: 227

 
Reply With Quote
Old 07-05-2010, 11:12 PM   #7
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 302 Times on 235 Posts


Quote:
Originally Posted by Tiber_Brew View Post
Good idea, P-J. That looks like a hopback, is it not? You could easily use that as a filter with just a few modifications if any.
It is a custom hopback that I built. The outlet (bottom line) is a length of 1/2" copper tubing that is split in half its entire length. I use a disk made from a floor polisher pad (white) as the filter medium.

Here is my writeup on the unit. It works a trip with hops but I'm sure that it could be setup as a charcoal filter as well.

 
Reply With Quote
Old 07-06-2010, 11:05 PM   #8
Spasticteapot
Recipes 
 
May 2010
Madison, WI
Posts: 21

Quote:
Originally Posted by Dunerunner View Post
Are you worried about evaporation? OK, so the system should be sealed. Why couldn't you modify a cartrige water filter,ala a Randal; for this purpose and move the liquor with a food grade pump?
[/IMG]
Where would I get such a pump at a reasonable price? I'm a reasonably accomplished metalworker, and silver brazing together some copper pipe in the appropriate shape would be easy-peasy. However, I've tried to avoid having to do this because of the cost of said pump.

Quote:
Originally Posted by Catt22 View Post
I was promptly informed that this was pure B.S. and had even been debunked by the Mythbuster guys. IOW, you might want to do a little more research on the subject before going forward with this. I'm not a vodka drinker, so I probably could not tell the difference if I did a before and after blind tasting.
From what I've heard, it goes from being "bad vodka" to "mediocre vodka." I'm looking for a completely tasteless white spirit, and carbon-filtered vodka is about as close as I'm likely to get.


 
Reply With Quote
Old 07-27-2010, 07:25 PM   #9
Whistler94
Recipes 
 
May 2009
canada
Posts: 9

What i use is a 5' long piece of 2" Stainless Steel pipe. Place a piece of fleece on one send and clamp it on with a Stainless hose clamp. Fill the pipe 3/4 of the way up with activated carbon. Place the whole unit into the open end of a funnel to collect the vodka coming out of the fleece end and collect it into something glass preferably. Attach a very large funnel or siphon from a bucket into the open end and voila! The cleanest spirit you have ever tasted. If you need any help at all with the design, i can put up a couple pictures of my set up.

O, and make sure to run a little water through the carbon if its the first time you use it. you can use carbon over and over, but you have to clean it every 50-100L that you do. To clean the carbon, boil it in an old pot on the stove for 15 min. Then place the carbon on a cookie sheet with parchment paper. Bake in the oven for 1 hour at 250 Celsius for one hour with the oven door propped open. Keep a couple windows open. Can be smelly!
Have fun.

As for using plastic, try not to use too much. High alcohols, (anything above 30% or so), will make every piece of plastic very very brittle. Learned that the hard way. if you do use some, just remember to replace it every time you clean your carbon.

Reason: Spelling mistakes.....

 
Reply With Quote
Old 07-28-2010, 05:44 PM   #10
BBBF
Recipes 
 
Aug 2008
Chicago
Posts: 1,408
Liked 104 Times on 84 Posts


Quote:
Originally Posted by Whistler94 View Post
What i use is a 5' long piece of 2" Stainless Steel pipe. Place a piece of fleece on one send and clamp it on with a Stainless hose clamp. Fill the pipe 3/4 of the way up with activated carbon. Place the whole unit into the open end of a funnel to collect the vodka coming out of the fleece end and collect it into something glass preferably. Attach a very large funnel or siphon from a bucket into the open end and voila! The cleanest spirit you have ever tasted. If you need any help at all with the design, i can put up a couple pictures of my set up.

O, and make sure to run a little water through the carbon if its the first time you use it. you can use carbon over and over, but you have to clean it every 50-100L that you do. To clean the carbon, boil it in an old pot on the stove for 15 min. Then place the carbon on a cookie sheet with parchment paper. Bake in the oven for 1 hour at 250 Celsius for one hour with the oven door propped open. Keep a couple windows open. Can be smelly!
Have fun.

As for using plastic, try not to use too much. High alcohols, (anything above 30% or so), will make every piece of plastic very very brittle. Learned that the hard way. if you do use some, just remember to replace it every time you clean your carbon.
Ever try running beer through that setup? I saw a recipe for making zima and part of me wants to try to make it, but I'd have to filter out all the good stuff.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hose End Charcoal Filter BierMuncher Equipment/Sanitation 22 02-17-2011 06:36 PM
Pacman already activated kingmatt Fermentation & Yeast 5 04-19-2010 03:40 AM
When do I have to use an activated pack by? jacksonbrown Fermentation & Yeast 3 04-06-2010 01:53 PM
Wyeast Activator activated Julohan Fermentation & Yeast 1 11-27-2009 03:28 AM
Yeast not activated discslinger Recipes/Ingredients 8 12-01-2008 06:59 PM


Forum Jump