Bar Top Question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Bar Top Question

Reply
 
Thread Tools
Old 07-01-2010, 10:00 PM   #1
yobata
Recipes 
 
Jan 2009
Posts: 10


Building a bar around a keezer (will post pictures later); wanted input on the bar top...

A friend donated a nice piece of granite that I could use (the bartop/counter will be adequately supported) but I am thinking of going the customized bottle caps and epoxy route... My questions are: What kind of epoxy can I use? Would polyurethane work? What about the whole propane torch to the epoxy/polyurethane to get the bubbles out? Is that safe for poly as well as epoxy? How to I keep the epoxy/poly from spilling over the sides (I get that I am suppose to frame it out like when pouring concrete so that it doesn't spill over, but then wont the epoxy stick to the wooden frame??)...

As you may be able to tell, I'm a little lost on the issue, so any help is greatly appreciated!!

 
Reply With Quote
Old 07-01-2010, 10:11 PM   #2
camiller
Recipes 
 
Apr 2007
Omaha, NE
Posts: 1,901
Liked 32 Times on 32 Posts


Generally the wood frame stays, so make it look good!

Here is a thread to get you some ideas. Around post 34-35 you'll see a pour and finished pics.

http://www.homebrewtalk.com/f11/bott...-bartop-91540/

 
Reply With Quote
Old 07-02-2010, 12:38 AM   #3
oceanselv
Recipes 
 
Dec 2009
Holly Springs, NC
Posts: 471
Liked 4 Times on 4 Posts


Why waste the granite?
__________________
Das Leben is zu kurz um schiess Bier zu trinken

 
Reply With Quote
Old 07-02-2010, 02:00 AM   #4
ScubaSteve
HBT_SUPPORTER.png
 
ScubaSteve's Avatar
Recipes 
 
May 2007
New Bern, NC
Posts: 3,677
Liked 83 Times on 57 Posts


Totally. Bottle caps are cool, but they will never beat granite. And especially not FREE granite. Plus it's a PITA to mess with epoxy and airbubbles.

 
Reply With Quote
Old 07-02-2010, 07:49 AM   #5
yobata
Recipes 
 
Jan 2009
Posts: 10

one of the reasons that i wanted to get away from the granite is that i wanted the bartop to be on hinges and be able to prop it up so i wouldnt have to move it or the keezer to refill... the granite would be much heavier (i believe??) than a 1/2" or so of polyurithane or epoxy... Maybe i'm wrong here?? also, the epoxy would enable a "custom" look since i could place old photos of baseball parks, fishing lures, etc...

 
Reply With Quote
Old 07-02-2010, 01:17 PM   #6
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
 
Hang Glider's Avatar
Recipes 
 
Mar 2007
North Augusta, SC
Posts: 3,210
Liked 199 Times on 150 Posts


http://www.uscomposites.com/kk121.html

this stuff is great - it doesn't yellow with age like traditional epoxy, and you can order a 1 quart "sample" (1 qt A and 1 qt B = 1/2 gal finished). Mix as little or as much as needed...

a good hair dryer or heat gun (low setting) will help get rid of bubbles.


 
Reply With Quote
Old 07-02-2010, 02:09 PM   #7
x2wdtoyotax
Recipes 
 
Dec 2009
Seoul, South Korea
Posts: 65

Quote:
Originally Posted by yobata View Post
one of the reasons that i wanted to get away from the granite is that i wanted the bartop to be on hinges and be able to prop it up so i wouldnt have to move it or the keezer to refill... the granite would be much heavier (i believe??) than a 1/2" or so of polyurithane or epoxy... Maybe i'm wrong here?? also, the epoxy would enable a "custom" look since i could place old photos of baseball parks, fishing lures, etc...
Either way you are going to have to prop it up. Those hinges aren't made to support ANY weight whatsoever. I made a keezer in college that had a formica top. I didn't even use the mdf base. I bought a sheet of formica veener and epoxy-ed it on. Just the weight of the epoxy adhesive and formica veneer was too much for those flimsy hinges.

If you are worried about weight, maybe look into adding some of those dampers that go on the top edge of a screen door. Truck camper shell doors use them too... I don't know what the offical name is, but I bet you can find a couple of heavy duty ones that would help support the weight of the top. Just an idea.
__________________
My current brews...

MiniBrew 6.5 - Firestone Pale 31 Clone (oaked)
5 Gal Secondary - Empty

Keg 1 - Empty
Keg 2 - Empty

Bottled -
Belgian Summer Saison


 
Reply With Quote
Old 07-02-2010, 02:13 PM   #8
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,614
Liked 3407 Times on 3249 Posts


Man, Passing up the beauty of a free granite slab for the look of a college frat house!?? Sorry man but !! It's not something you lift daily. I would not worry about the weight. What size freezer are we talking? Now it is some behemoth holding 15-20 kegs, ok, but the standard 7-9cuft, no biggie.

Don't know what went wrong with guy above me's hinges, but mine hold up fine to quite a large build on them, and look at Jester's Keezer, that build also is using stock hinges with no issues.

 
Reply With Quote
Old 07-02-2010, 09:34 PM   #9
yobata
Recipes 
 
Jan 2009
Posts: 10

the freezer is around 14-15cubes (haven't measures it yet, but it holds a regular keg [1/2bbl] with enough room for 4-5 cornies and a gas tank)... I actually built up the bar frame with 2x4s around the keezer and will place beefy door hinges on that frame so i wont be relying on the stock freezer hinges anyway (the freezer was probably from the 90s or even 80s -got it from craigslist for $40!!)

The granite would be 21" x 70" total if i went with that... The bar frame is not connected to freezer in any way and i could just slide the whole freezer out (purposely left room to do so) to refill, but thought it would be easier to place it all on hinges...

btw, thanks for all the links to epoxies and great brainstorming...

 
Reply With Quote
Old 07-03-2010, 03:59 AM   #10
ddknight
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2008
Cincinnati, Ohio
Posts: 157

I did my whole bar top with epoxy from US Composite. Made out of an old door from our family farmhouse. It was really easy and I think it looks great. Very classy look when done right. I just used a hair dryer to get rid of the bubbles. To avoid the spilling over the edge I used a piece of cardboard sercured to the edge with thumbtacks and tape so it wouldn't spill. Worked just fine. I used the leftover epoxy to finish off my barback that I built. It's all self leveling which makes it pretty easy to use.

Click image for larger version

Name:	bar top 3.jpg
Views:	179
Size:	31.7 KB
ID:	16246

Click image for larger version

Name:	CIMG2419.jpg
Views:	171
Size:	51.4 KB
ID:	16247

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A question about Coriander in a porter and another question about yeast tired Recipes/Ingredients 7 01-28-2009 11:55 PM
Malt Rating Question (newbie question) LumberjackJohn Recipes/Ingredients 3 12-09-2008 06:22 PM
Recipe Sparge Question (Beersmith Question) IrregularPulse All Grain & Partial Mash Brewing 8 06-26-2008 06:10 PM
Making Chocolate Oatmeal stout. OG question and smack pack starter Question. britishbloke Beginners Beer Brewing Forum 10 02-23-2007 06:01 PM


Forum Jump