First time keggine problems - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > First time keggine problems

Reply
 
Thread Tools
Old 07-01-2010, 06:18 PM   #1
Patirck
Recipes 
 
Apr 2010
Glendale, CA
Posts: 754
Liked 14 Times on 13 Posts



I have had the stout on tap since Saturday and still cannot get it to carb up! I have played the pressure game of doing the super boost with shake and also just letting it sit for a few days at what should be the normal pressure. It generates a little head but does not seem to get bubbly at all.

The beer is a stout so I don't want it too bubbly. It is at about 44*f. I have tried letting it sit at 30lbs over night and did a lot of shaking. It seemed to be comming out of the tap with such force that it created a head that quickly disapated. I then turned it down to 10 for three days and now it pours out better but has almost no head and no bubbles...

This is my first kegging attempt and I currently have nothing bottled - I'm out of homebrew!

I have three corney kegs and have a fruit beer that will be ready to keg in about a week and a weizenbock in about a month. I'm looking forward to getting all three going at the same time.

Reason: sp. correction

 
Reply With Quote
Old 07-01-2010, 06:27 PM   #2
DustinHickey
Recipes 
 
Mar 2010
Long Island NY
Posts: 290
Liked 3 Times on 3 Posts


If your force carbing at normal pressure it takes 2 to 3 weeks to carb. I never tried the high pressure shake method but hear its dangerous due to the fact that it's easy to overcarb. Maybe someone else has more experience in that method.

Are you using co2 or beer gas with your stout?

It sounds to me like you just didn't give it enough time at normal pressure and temperature for it to carb up. ( aside from the 30 psi overnight shaking ) that I know nuthing about.

 
Reply With Quote
Old 07-01-2010, 06:34 PM   #3
Patirck
Recipes 
 
Apr 2010
Glendale, CA
Posts: 754
Liked 14 Times on 13 Posts


I am using CO2. What is beer gas? I have heard about nitrogen systems for stouts - sounds cool but right now I want to keep it simple.

 
Reply With Quote
Old 07-01-2010, 06:43 PM   #4
Shrewd_Alchemist
Recipes 
 
Jun 2010
Richmond, VA
Posts: 77
Liked 1 Times on 1 Posts


Relax dude, set it at about 12 psi and leave it for another week. Quit shaking your keg, you'll never get anything to settle out that way.
__________________
Kegged: Nothing :(
Bottled: Chocolate Stout, Barleywine, orange-cranberry mead
Primary: Full Nelson SMASH!!!
Secondary: Oktoberfest!

 
Reply With Quote
Old 07-01-2010, 06:46 PM   #5
DustinHickey
Recipes 
 
Mar 2010
Long Island NY
Posts: 290
Liked 3 Times on 3 Posts


Beer gas is a mixture of N2 and CO2. Used to acheive high pressure at stout tap without overcarbing. If you were using it by mistake at regular pressures it would explain why you weren't carbing at high pressures. but if using co2, i agree with shrewd. It just needs more time under pressure at the appropriate temperature. Make sure you check it agiainst a keg carbing chart. And if you add pressure, do it in small increments 1 psi at a time. Overcarbing is the worst... takes days or week to get back to normal. Thats the bigges lesson ive learned kegging.

 
Reply With Quote
Old 07-01-2010, 06:50 PM   #6
Patirck
Recipes 
 
Apr 2010
Glendale, CA
Posts: 754
Liked 14 Times on 13 Posts


So there is no real shock and awe method of force carbing that will allow me to have this ready for Sunday?

 
Reply With Quote
Old 07-01-2010, 06:52 PM   #7
DustinHickey
Recipes 
 
Mar 2010
Long Island NY
Posts: 290
Liked 3 Times on 3 Posts


There is. Theres a sticky on it in the bottleing and kegging section. I've never tried it but i've been told it take some practice. Check it out.

http://www.homebrewtalk.com/f35/keg-...strated-73328/

 
Reply With Quote
Old 07-01-2010, 06:55 PM   #8
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Recipes 
 
Oct 2009
Thiensville, Wisconsin
Posts: 8,308
Liked 498 Times on 386 Posts


if you want it ready by saturday, yeah you can crank it to 30psi and shake the crap out of it.

but regardless, you're gonna have to drop it down to ~10psi for serving, or you'll have a beer-firehose

 
Reply With Quote
Old 07-01-2010, 07:06 PM   #9
DustinHickey
Recipes 
 
Mar 2010
Long Island NY
Posts: 290
Liked 3 Times on 3 Posts


Above sticky says to set it at 30 psi for 24 hours and reg pressure for a day or so after. It recomends not shaking due to common overcarbonation problems. Thats no fun I assure you.

 
Reply With Quote
Old 07-01-2010, 10:35 PM   #10
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


How long are your tap lines? It sounds like you've over carbed it, and are dispensing at too high a pressure for teh tap line, so it really pours too fast, knocks too much CO2 out of solution.

Try turning it down to like 4 psi, purge the pressure down to 4psi, and see what the pour is like. shouldn't be as foamy and i bet it tastes too bubbly.
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First time carbing and problems Leppah Bottling/Kegging 1 08-21-2009 06:49 PM
First time AG'er!!! Problems already!!! mjackson Beginners Beer Brewing Forum 2 01-14-2009 04:14 AM
One last time...hopefully (carb problems) kmlavoy Bottling/Kegging 3 07-13-2008 02:22 PM
First time wine. Problems Dave the Brewer Winemaking Forum 2 10-17-2007 03:06 PM
First time kegging problems with the tap spmonahan Bottling/Kegging 5 08-12-2007 03:16 AM


Forum Jump