I kegged a brett beer. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > I kegged a brett beer.

Thread Tools
Old 06-29-2010, 02:03 PM   #1
petep1980's Avatar
Nov 2008
Posts: 1,905
Liked 15 Times on 15 Posts

Am I going to have issues kegging others after this? I don't want to infect all my other beer.

Reply With Quote
Old 06-29-2010, 02:43 PM   #2
Oct 2009
Posts: 82
Liked 4 Times on 3 Posts

I'd replace all of your gaskets and the O-ring on your keg, then clean and sanitize like a mad man. The stainless should clean up fine, but any rubber bits are too porous to ever be fully trustworthy.

Put a label on that keg, so that you can track whether it had an impact on your next brew.

Reply With Quote
Old 06-29-2010, 02:47 PM   #3
Beerrific's Avatar
Mar 2007
Posts: 5,562
Liked 54 Times on 46 Posts

Lines...yeah sure, keep them separate. Taps, disconnects? IDK. I mean you should be sanitizing them anyway. Sanitary is sanitary. I have reused cobra taps and disconnects with no problem, but I fully dissasmeble them and treat them with hot PBW and StarSan.

The only o-ring/poppet that should come in contact with the beer is the liquid side poppet. I would not really worry about the o-rings. If you are worried that much, you could autoclave sterilize them (in a pressure caner).

Reply With Quote
Old 06-29-2010, 04:44 PM   #4
Licensed Sensual Massage Therapist.
Homercidal's Avatar
Feb 2008
Reed City, MI
Posts: 31,073
Liked 4914 Times on 3314 Posts

Everything can be cleaned and sanitized. But the plastic stuff should probably be kept separate, simply because it's not worth the cost to have any issues.

Anything metal can be heated in oven to sterilize, or soaked in bleach solution. (except I think you're not supposed to soak Stainless in bleach). But a good cleaning and sanitizing ought to fix most anything that can't go into the oven
Day after day, it reappears. Night after night my heartbeat shows the fear. Ghosts appear and fade away. Come back another day.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Secondary Brett Fermentation - Brett Starter? toman8r Fermentation & Yeast 6 10-14-2014 02:42 PM
My First 100% Brett C Beer DanZarrella Recipes/Ingredients 1 09-19-2010 06:49 PM
Dry hopped Brett beer Beernik General Beer Discussion 22 07-23-2010 06:01 PM
100% Brett Beer II landhoney Lambic & Wild Brewing 27 01-30-2010 06:25 AM
100% Brett Beer landhoney All Grain & Partial Mash Brewing 41 11-22-2009 08:08 PM

Forum Jump