DYI Stirplate Trouble - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers & Stir Plates > DYI Stirplate Trouble

Reply
 
Thread Tools
Old 06-11-2010, 12:15 AM   #1
Rockweezy
Recipes 
 
Jun 2006
Oahu, HI
Posts: 202


I have been stuck trouble shooting my Stirplate build. I followed Anthony Lopez cheap and easy stirplate build up the project locater on this site. I attempted using several old cell phone chargers, but they did not provide enough power to get water whirl-pooling. So I realize I need more power.

I went to Radio Shack and they have a ton of options, but I have no idea about this stuff and neither to they. I believe I want an AC to DC power source that can switch voltages from 5V, 7V, 9V and 12V, but I don't even know. They range in price from $20 to $48, so before I shell out the money and splice the cords I want to know I am getting the right thing. If you know of links on ebay or amazon that would be cool too. Thanks


__________________
Diamond Head Brewery (DHB)

Carboy #1: Tallgrass Talcyon Wheat
Carboy #2: Full Sail Amber Clone
Carboy #3: Graff
In the Hole: Keg #5: Citra Pale Ale

Keg #1: Darth Vader (Black IPA)
Keg #2: Smash Ale
Keg #3: Amayson Saison
Keg #4: Citra Pale Ale

 
Reply With Quote
Old 06-11-2010, 12:49 AM   #2
DevilsCreekBrewing
Recipes 
 
Sep 2009
Cambridge Ontario
Posts: 214
Liked 1 Times on 1 Posts


Do you have any surplus stores near you? I was able to fin a 12VDC wall wort for $6.00 at the one by me.



 
Reply With Quote
Old 06-11-2010, 03:53 AM   #3
Rockweezy
Recipes 
 
Jun 2006
Oahu, HI
Posts: 202

I'll have to look at the local hardware store, but I still need to know exactly what I need to buy.
__________________
Diamond Head Brewery (DHB)

Carboy #1: Tallgrass Talcyon Wheat
Carboy #2: Full Sail Amber Clone
Carboy #3: Graff
In the Hole: Keg #5: Citra Pale Ale

Keg #1: Darth Vader (Black IPA)
Keg #2: Smash Ale
Keg #3: Amayson Saison
Keg #4: Citra Pale Ale

 
Reply With Quote
Old 06-11-2010, 05:14 AM   #4
camiller
Recipes 
 
Apr 2007
Omaha, NE
Posts: 1,899
Liked 32 Times on 32 Posts


If you didn't do a speed control knob on your stir plate and want something that can switch voltages then something like this http://www.amazon.com/VX-79NP-MULTI-...6233081&sr=1-2 should work, If you look at the larger picture you will notice a slider at the bottom edge where you switch the voltage.

 
Reply With Quote
Old 06-11-2010, 12:44 PM   #5
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


Go to a pawn shop near by, and buy the oldest wireless phone they have - The power supplies were 12v DC, and usually over 1 amp. Plus it shouldn't cost much!

CL might be a good option too.
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 06-11-2010, 01:34 PM   #6
wyzazz
Recipes 
 
Aug 2009
Atwater, OH
Posts: 4,300
Liked 53 Times on 50 Posts


You don't need a vortex for a stirplate to be effective, all that needs to happen is to have that stirbar spin a bit to keep the starter churned up and get the yeast more in contact with the sugar.

If you've already got that then you're golden, if not then I'd recommend the adjustable wall-wort linked to above.
__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)

 
Reply With Quote
Old 06-11-2010, 02:09 PM   #7
Homercidal
Licensed Sensual Massage Therapist.
HBT_MODERATOR.png
 
Homercidal's Avatar
Recipes 
 
Feb 2008
Reed City, MI
Posts: 30,337
Liked 4671 Times on 3148 Posts


A 12VDC fan will require DC Voltage. Somewhere between 0 and 13ish volts should work.

Check to see if the fan is turning without the flask. I used a cheap potentiometer on my stirplate and don't even use it. I have a 6V mobile phone charger wired in and the pot is turned all the way down.

The vortex is cool, but you don't need it. Even at a slow speed, the yeast will become suspended, and remain in contact with the wort and the surface to exchange oxygen.

My stirbar is ribbed for my pleasure. That might also help.
__________________
What year is this?
It's the Viking age.
That explains the Laser Raptors! F***! I went back in time too far! - Kung Fury

 
Reply With Quote
Old 06-11-2010, 02:23 PM   #8
BadgerBrewer
Recipes 
 
Jun 2009
McKinney, TX
Posts: 344
Liked 6 Times on 6 Posts


I have a 12V power supply and I am thinking it might be too much? I have a 1 1/2" stir bar and for the love of life I cannot get it to spin. When I turn my unit on the thing just jumps around and never spins. I have tried reversing the magnet (the arc shaped one from the inside of a hard drive) and it still jumps. The HD magnet isn't epoxied to the fan in any way, it just sticks to it since the fan itself must be magnetized. Do I need a second potentiometer to reduce the current/speed or should I switch to a 6-9v power cord and see if it does anything?
__________________
"It has been said that politics is the second oldest profession. I have learned that it bears a striking resemblance to the first." - Ronald Reagan

 
Reply With Quote
Old 06-11-2010, 04:26 PM   #9
rockytoptim
HBT_SUPPORTER.png
 
rockytoptim's Avatar
Recipes 
 
May 2009
Livonia, MI
Posts: 775
Liked 95 Times on 76 Posts


Have you tried a shorter stir bar. I have the stir plate posted above and it came with a 1" stir bar. It works fine when an I usually make a 1800ml starter.

I bought a longer 1 1/2 stir just to try it and it just jumps around. After make 5 or so starter I realize that I don't need that big of stir bar. It doesn't take much to keep the yeast in suspension.
__________________
On Tap: Bee Cave Robust Porter
On Tap: Bee Cave OktoberFest
On Tap: Bee Cave Kolsch
Primary: None
Up next: ????

 
Reply With Quote
Old 06-11-2010, 04:49 PM   #10
Great_Neck_Brewer
 
Great_Neck_Brewer's Avatar
Recipes 
 
Mar 2008
Great Neck, New York
Posts: 177
Liked 3 Times on 3 Posts


On my 12V fan I used a 9V power supply and a regulator. This will slow the fan down enough so it doesn't go spinning the magnet off.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
And one more DIY stirplate... -TH- Chillers & Stir Plates 9 01-03-2012 09:05 PM
DIY Stirplate help chode720 Chillers & Stir Plates 19 03-02-2011 04:19 AM
1 gal jug with stirplate? rocketman768 Fermentation & Yeast 5 01-08-2010 01:29 PM
stirplate? Gumbys_Brew Equipment/Sanitation 6 11-16-2009 11:21 PM
$5 Stirplate Mirilis Equipment/Sanitation 7 04-21-2009 07:32 PM


Forum Jump