Adding a splitter to a manifold - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Adding a splitter to a manifold

Reply
 
Thread Tools
Old 06-02-2010, 08:53 PM   #1
Rothman
Recipes 
 
Jul 2008
Posts: 27



I'm looking to increase the number of beers I can have on tap, but I don't want to buy another gas splitter. I also don't want to go without a check valve. I was thinking about cutting a gas line on the keg side of the gas splitter and adding a tee. I was thinking about something like this Cross. With three of the barbs going to kegs and one going to the check valve. Would this work? Could I get away with just cutting up my existing beer line and hose clamping it to the cross?

Thanks,
Adam


 
Reply With Quote
Old 06-02-2010, 09:16 PM   #2

Yes, a splitter will work just fine. You'll only be able to carb those kegs at the same pressure, but I usually carb mine all the same anyways.
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 06-03-2010, 01:46 AM   #3
zymurgy101
Recipes 
 
Mar 2010
NC
Posts: 307
Liked 5 Times on 5 Posts


Your URL is valid, but the hyperlink is not...at least for me. Try this one:

http://stores.kegconnection.com/Detail.bok?no=223

You could also ask one of the guys at KegConnection if they have any ideas.
__________________
Fermenting: Some IPA
On Tap:
Always an IPA


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
co2 2 or 3 way distribution splitter cryptonic84 Bottling/Kegging 5 10-10-2010 03:26 PM
Tongue Splitter? Stickshaker Recipes/Ingredients 7 12-26-2009 09:53 PM
Skull Splitter blowmax10 Recipes/Ingredients 3 12-30-2008 04:42 AM
Y Splitter Connection Problems dipflop Equipment/Sanitation 4 06-20-2008 06:09 PM
Gas line splitter Brewing Clamper Equipment/Sanitation 2 08-29-2007 07:31 PM


Forum Jump