Alternative to water heater elements? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Alternative to water heater elements?

Reply
 
Thread Tools
Old 06-01-2010, 04:14 PM   #1
SweetSounds
 
SweetSounds's Avatar
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts



Has anyone ever tried using a cartridge heater? The kind used in molding and other industrial processes? They seem to be available anywhere from 200 watts up to 2000+ And they are designed to be inserted into a hole in a molding block or something like that. I was thinking maybe they could be installed in a thermowell? Or directly through a compression fitting? They are cheap on eBay, and look to be pretty versatile.
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 06-01-2010, 06:03 PM   #2
gunner65
 
gunner65's Avatar
Recipes 
 
Feb 2010
Lexington, KY
Posts: 843
Liked 17 Times on 14 Posts


We use them for our humidity biolers on our environmental chambers. They are essentailly the same thing as the water heater elements only they are wrapped in a stainless package. They are also quite pricey when bought new. I would be leary of buying used ones as they do go bad after long term heavy industrial use plus you never know what they were used for.
__________________
Single Vessel BIAB is all I need....Until we figure out the no vessel technique.

 
Reply With Quote
Old 06-01-2010, 06:16 PM   #3
SweetSounds
 
SweetSounds's Avatar
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


I agree, but there are several on ebay that say they are NIB, and less than $10 each I was thinking about putting them in a 5 gallon corny HLT through a compression weldless fitting...

I really like that they are sealed, and they have leads instead of the trouble we have to go through to mount a water heater element.
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 06-01-2010, 07:11 PM   #4
ScottyBones
HBT_LIFETIMESUPPORTER.png
 
ScottyBones's Avatar
Recipes 
 
Sep 2008
Alexandria, VA
Posts: 112


give 'em a try and let us know!
__________________
Quagmire: "lets play drink the beer!"
Peter: "what do i get if i win?"
Quagmire: "another beer!"
Peter: "Oh man, i'm going for the high score!"

 
Reply With Quote
Old 06-01-2010, 07:15 PM   #5
bendavanza
 
bendavanza's Avatar
Recipes 
 
Aug 2008
Oak CLiff, TX
Posts: 2,218
Liked 19 Times on 17 Posts


I'm using something like that in my RIMS (link below). I don't know where to get more of these though. I like that it's all ss touching the wort.
__________________
My brew tree
My RIMS toolbox

 
Reply With Quote
Old 06-01-2010, 07:51 PM   #6
SweetSounds
 
SweetSounds's Avatar
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


Quote:
Originally Posted by bendavanza View Post
I'm using something like that in my RIMS (link below). I don't know where to get more of these though. I like that it's all ss touching the wort.
How many watts is your element rated for, and how does it perform? That's pretty much exactly what I'm wanting to do. Though I find myself torn (again) between a big RIMS and no HLT, and an HLT with something like this in it...
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 06-01-2010, 08:11 PM   #7
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,818
Liked 3450 Times on 3275 Posts


Those shown are 200 watts. You'd need 8-10 to make it worthwhile. A 2000 watt element is less than 20 bucks.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas.

 
Reply With Quote
Old 06-01-2010, 08:16 PM   #8
SweetSounds
 
SweetSounds's Avatar
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


Quote:
Originally Posted by IrregularPulse View Post
Those shown are 200 watts. You'd need 8-10 to make it worthwhile. A 2000 watt element is less than 20 bucks.
Yea, I know. I just grabbed those as an example. They are available upwards of 5kw each, and in various lengths.
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 06-01-2010, 08:22 PM   #9
CodeRage
Death by Magumba!
HBT_LIFETIMESUPPORTER.png
 
CodeRage's Avatar
Recipes 
 
Aug 2007
Melbourne, Fl
Posts: 2,222
Liked 47 Times on 20 Posts


Without parroting the concerns listed beforehand, yeah they would work. Like a regular water heater element, they need to be in direct contact with the water so a thermowell would be a no go.
__________________
Brutus 20e build | Electrical Primer for Brewers | Auber SYL-2362A2 PID Install & Config
So as I am walking out the door this morning I think to my self:
"self, going to work on Monday is like knowing you're going to get kicked in the nuts. You just don't know when or by who"

 
Reply With Quote
Old 06-01-2010, 08:28 PM   #10
SweetSounds
 
SweetSounds's Avatar
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


Quote:
Originally Posted by CodeRage View Post
Without parroting the concerns listed beforehand, yeah they would work. Like a regular water heater element, they need to be in direct contact with the water so a thermowell would be a no go.
I'm no expert, which is why I asked the question, but...
I did a little research on these, and one of their primary applications seems to be in die cast and injection molding, where they are inserted in drilled holes to heat the molds. In fact, I found a chart that showed the maximum watt density for an element, based on how tight the tolerance was between the heater and the mold block. At .005" the density was very high, and decreased as the gap between the element and the mold increased. That is why I was wondering about insertion into a thermowell - It would make it a lot less important to know where they came from and what they did in a past life.

Regardless, I get the impression they will work. Which answers my question. Now I just gotta decide what I want to do
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wattage Calculator for Hot Water Heater Elements sanders5x Equipment/Sanitation 10 04-19-2014 03:07 AM
Discussion of Heater elements? achilles007 Cheese Making Forum 4 04-19-2010 07:17 AM
Question for anyone that uses water heater heating elements Bytor1100 Brew Stands 1 08-02-2008 08:03 AM
Controlling heater elements AiredAle Equipment/Sanitation 20 01-10-2007 03:21 AM
Wort burning with heater elements/pots ? brewman ! Equipment/Sanitation 2 12-11-2006 11:00 PM


Forum Jump