Cardinal sin: a dirty racking tube ! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Cardinal sin: a dirty racking tube !

Reply
 
Thread Tools
Old 12-20-2006, 03:07 AM   #1
brewman !
Recipes 
 
Nov 2006
Posts: 1,428
Liked 36 Times on 33 Posts



I did the cardinal sin tonight. I racked 2 wines. When I was done I was washing the second racking tube and I noticed a 4 inch dirty section just below the bend in the cane. I racked 2 wines through that dirty racking tube. Luckily, hopefully, they were done fermenting.

I don't know how it happened. I rinse everything when I am done using it and then I wash it.

I have said racking cane now soaking with B Brite. I am not sure how to get it 100% clean again.

I could never use non see through equipment. I have to be able to see where the dirt and nasties hang out.

Has this sort of thing ever happened to you ?
__________________
Getting back into brewing...

 
Reply With Quote
Old 12-20-2006, 12:41 PM   #2
zoebisch01
 
zoebisch01's Avatar
Recipes 
 
Nov 2006
Central PA
Posts: 5,182
Liked 10 Times on 10 Posts


Hasn't happend to me, and hopefully won't. Deep breath, hold....it'll be okay...it'll be okay....

Can you try the vaccuum trick and string with a tiny ball of say cotton or something? Vaccuum the string through (prolly need to make a temporary nozzle modification) and then use the string to pull through oh I dunno pipe cleaners or something. Just a brainstorm... (although the diameter of the tube might prove tricky)

hope the wine is a-ok!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
how best to clean a dirty blow off tube ethangray19 Beginners Beer Brewing Forum 49 01-11-2015 03:08 AM
Tip: getting air bubbles out of racking tube paradoc Beginners Beer Brewing Forum 9 05-06-2009 05:24 PM
racking tube wedge aflyershckyfan Equipment/Sanitation 0 02-28-2009 05:08 AM
What can I fill my racking tube with to begin racking? bgough Beginners Beer Brewing Forum 4 02-16-2009 12:41 AM
disassembling racking tube trainfever Bottling/Kegging 3 11-24-2007 11:30 PM


Forum Jump