15 Gallon MLT - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > 15 Gallon MLT

Reply
 
Thread Tools
Old 05-06-2010, 05:00 PM   #1
arturo7
HBT_SUPPORTER.png
 
arturo7's Avatar
Recipes 
 
Apr 2007
Huntington Beach
Posts: 9,657
Liked 474 Times on 326 Posts



Here is my new MLT.

The vessel:
60 liter HDPE drum
Purchased this used for $15, it was used once to ship cooking oil. After a decent cleaning with Oxy, there was no residue and no smell.




The insulation:
1" flexible polyurethane foam
Purchased from McMaster-Carr for about $30, item # 9385K23. I'm guestimating that this gives me about the same R-factor as a cooler.




The assembly:
The insulation is held in place with cargo straps. This makes it easy to disassemble for cleaning and storage. I've done four 10 gallon batches in it. It has lost not more than one degree of mash temp.





I'll mount a proper themro on it someday. The bulkhead and valve are from Brewmaster's Warehouse. I'm still experimenting with the manifold/false bottom.


__________________
Hey, knock that shvt off. We're drinkin' here.

Reason: better pic

 
Reply With Quote
Old 05-06-2010, 05:06 PM   #2
sjlammer
Recipes 
 
Jul 2007
Albany, NY
Posts: 539
Liked 6 Times on 6 Posts


Nice! Looks pretty good!


__________________
~"A fine beer may be judged with only one sip, but it's better to be thoroughly sure.

On Deck: Spruce APA, Chambord Fortified Chocolate Porter, Imperial IPA

Primary:
Primary:
Secondary: Belgian Dark Strong Ale
Conical:
Lagering: None
Kegged/Drinking: Cascade, Cent., Amarillo Pale Ale
Kegged/Drinking: Belgian Pale Ale (HG yeast for yeast cropping see above)
Bottled: ESB

 
Reply With Quote
Old 05-06-2010, 05:28 PM   #3
stevehaun
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Dec 2006
hudson, wi
Posts: 689
Liked 37 Times on 31 Posts


I use a 55 gallon HDPE barrel for my MLT. These barrels are thick and easy to make a bulkhead for. I use a herms and I don't insulate. I love mine and I think you will be quite happy with yours.

 
Reply With Quote
Old 05-06-2010, 10:11 PM   #4
thenatibrewer
Recipes 
 
Jan 2007
cincinnati
Posts: 144

what kind of manifold/false bottom are you going to make for it? looks nice, well done. post some pics when you get a chance.....
__________________
He who drinks beer sleeps well. he who sleeps well cannot sin. He who does not sin goes to heaven. Amen.

-unknown monk

 
Reply With Quote
Old 05-06-2010, 10:18 PM   #5
RegionalChaos
Recipes 
 
Jan 2008
Drain, OR
Posts: 605
Liked 7 Times on 6 Posts


Great to see this. I have a few HDPE malt containers, used from the LHBS. I was thinking about using one for a MLT too. The insulation is what gets me a bit.. Seems almost the same price as a cooler, so I'm on the fence. Maybe if I got a good deal on insulation it would make more sense...
__________________
How I brew: Stir plate starters, Extract, Full boil in a Keggle, 10 gallon batches.
Brewing upgrades in progress: temp controlled ferment, stir plate re-work, building mash tun, milling station

Planned House Ales: an Amber, an IPA, a dark IPA, a Mango Ale, a blueberry oatmeal stout, a dry Irish stout, a honey wheat, Apfelwien

What kind of R-Value does your ferm chamber need? - http://www.homebrewtalk.com/f51/what...hamber-190459/

 
Reply With Quote
Old 05-06-2010, 11:27 PM   #6
arturo7
HBT_SUPPORTER.png
 
arturo7's Avatar
Recipes 
 
Apr 2007
Huntington Beach
Posts: 9,657
Liked 474 Times on 326 Posts


RC, the cost may not be any lower than a cooler but I wanted to do 10 gallon batches in a round tun.
__________________
Hey, knock that shvt off. We're drinkin' here.

 
Reply With Quote
Old 05-06-2010, 11:32 PM   #7
arturo7
HBT_SUPPORTER.png
 
arturo7's Avatar
Recipes 
 
Apr 2007
Huntington Beach
Posts: 9,657
Liked 474 Times on 326 Posts


Nati, eventually I think I'll end up with a perforated stainless steel false bottom. Right now I'm using high temp tubing and a vegetable steamer.
__________________
Hey, knock that shvt off. We're drinkin' here.

 
Reply With Quote
Old 05-20-2010, 03:32 AM   #8
android
Recipes 
 
Jan 2009
Ames, Iowa
Posts: 3,062
Liked 43 Times on 34 Posts


that looks very nice, good use of recycled material.
__________________
primary: APA

ebay temp controller | thermostat temp controller

 
Reply With Quote
Old 05-20-2010, 05:07 AM   #9
jppostKW
Recipes 
 
Jan 2009
Englewood CO
Posts: 1,807
Liked 11 Times on 11 Posts


A cheaper way to insulate would be foam camping pads looks good though

 
Reply With Quote
Old 05-20-2010, 03:18 PM   #10
RegionalChaos
Recipes 
 
Jan 2008
Drain, OR
Posts: 605
Liked 7 Times on 6 Posts


What kind of R value would one want for Tun insulation? What kind of R value does a cooler have? What kind of R value do foam camping pads have?


__________________
How I brew: Stir plate starters, Extract, Full boil in a Keggle, 10 gallon batches.
Brewing upgrades in progress: temp controlled ferment, stir plate re-work, building mash tun, milling station

Planned House Ales: an Amber, an IPA, a dark IPA, a Mango Ale, a blueberry oatmeal stout, a dry Irish stout, a honey wheat, Apfelwien

What kind of R-Value does your ferm chamber need? - http://www.homebrewtalk.com/f51/what...hamber-190459/

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gallon markings for 7 gallon plastic primary fermenter scone Beginners Beer Brewing Forum 13 03-15-2014 07:16 PM
Minimum burner BTU - 10 gallon batches in 15.5 gallon keggle schneemann Equipment/Sanitation 21 10-27-2009 04:01 PM
How do I scale a 5 gallon recipe to a 6 gallon yield? (extract) skahorse Recipes/Ingredients 7 10-18-2009 02:36 AM
10 gallon and 5 gallon rubbermaid water coolers delivered for 68 bucks. RedOctober Equipment/Sanitation 6 12-12-2008 06:33 PM
5 gallon batch + 5 gallon primary fermenter = good noisy123 Beginners Beer Brewing Forum 13 07-30-2008 11:45 AM


Forum Jump