Cooling Lager Prior to Yeast Pitch - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Techniques > Cooling Lager Prior to Yeast Pitch

Reply
 
Thread Tools
Old 12-12-2006, 12:00 AM   #1
DiegoProf
Recipes 
 
Oct 2006
Posts: 17


Hi all,

I'm getting ready to brew my first lager (which will also be my first all grain batch. This is probably a very bad idea...). I was reading John Palmer's book, where in the latest edition he recommends cooling the wort to fermentation temperature prior to pitching the yeast (rather than pitching at 70 and then cooling to optimum fermentation temp). This makes good sense to me. But since I'll be working with White Labs #833, this means going all the way down to 48-55 degrees F.

My question is -- how am I supposed to do this?? I've got a two-stage immersion chiller that will get the wort down to 70 pretty quick, but no way it'll get it to 50. Should I stick the immersion-cooled wort in the carboy, put it in the fridge, and let it sit overnight to get down to 50, prior to pitching the yeast? It makes me a little nervous to leave vulnerable wort exposed for so long, but I don't see any real alternative.

-Matt

 
Reply With Quote
Old 12-12-2006, 12:13 AM   #2
boo boo
Recipes 
 
Jun 2005
Hearts's Delight, Newfoundland
Posts: 4,165
Liked 35 Times on 30 Posts


Yes I would wait to pitch my yeast. If you need to put it in the fridge than do it.
My water is cold this time of the year and I get to 55f with an immersion chiller if I leave it going and stirring for 1/2 an hour. I then put it in my fridge until I get 50f and pitch a 45f yeast slurry ( from a starter or yeast cake ) into it. I get a great start and ferment.

As long as everything is sanitary, you should have no worries.
__________________
How do you BBQ an elephant....first you get your elephant....

 
Reply With Quote
Old 12-12-2006, 07:27 AM   #3

Wow, I too am brewing my first lager tomorrow and was going to post the exact same question. This board rocks!

 
Reply With Quote
Old 12-12-2006, 12:43 PM   #4
Mikey
Recipes 
 
Nov 2005
I'm gone!
Posts: 666
Liked 5 Times on 5 Posts


Although there's no universal agreement, you can do it either way.

1) pitch at fermentation temps and expect a long lag time unless you have a BIG starter. Slight risk of contamination.

2) pitch at room temp and cool when fermentation starts. This is faster but risks (I've never tasted this) some fruity off flavours.

 
Reply With Quote
Old 12-12-2006, 09:41 PM   #5
Dr Malt
Recipes 
 
Aug 2005
Pacific Northwest
Posts: 305
Liked 15 Times on 14 Posts


I have made lagers for 4 years during the winter months where my garage get down to the nice temperature of about 55 F for fermentations. I boil my worts and cool to about 75 F with an emersion chiller. I then pitch my lager yeast at 75 F and place it in my 55 F garage. In some cases, I have placed my primary fermenter in the house overnight to allow the yeast to get a good start before cooling to the 55 F. In all cases, I have not had any major flavor effects (fruity, sulfury) from this practice. In fact, I have had excellent lagers. I feel the warmer temperatures for the first 12 - 24 hours allows the yeast to get going. I also use a yeast starter.

Dr Malt

 
Reply With Quote
Old 12-12-2006, 09:52 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,331
Liked 1765 Times on 1122 Posts


If you pitch between 60-70 and immediately put it in your cooler environment, it will likely cool to optimum ferment temps before the yeast really start working anyway. Of course, there will be people who want to split hairs and argue that even an hour at higher than recommended temps will utterly ruin your batch even during lag time, but unless someone blind taste tests it, I'm undecided.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 12-12-2006, 10:49 PM   #7
Kaiser
 
Kaiser's Avatar
Recipes 
 
Nov 2005
Pepperell, MA
Posts: 3,895
Liked 129 Times on 75 Posts


Though pitching lagers cold is the preferred way, you shouldn't do this unless you have the proper amount of yeast to pitch (about 100ml (3oz) of yeast sediment for an average 5 gal batch) and the ability to bring the wort to that temp before pitching w/o having to wait long. pitching warm and letting it coold during then initial hours would be safer.

I bring the wort below 50F by using a utility pump in a bucket with ice water to circulate this ice water though the immersion chiller after I got the wort below 70 with tap water. This idea comes from Jamil (see mrmalty.com). He also has a good pitching calculator on this page.

Kai

 
Reply With Quote
Old 12-13-2006, 12:14 AM   #8
dantodd
 
dantodd's Avatar
Recipes 
 
Oct 2006
San Carlos, CA
Posts: 1,173
Liked 11 Times on 9 Posts


do what kaiser suggested regarding the ice water in your chiller. Then pitch big.

This will keep away the diacetyl which means you won't need to bring the beer up to 70 after primary for a diacetyl rest. It will also help you limit esters which are more appropriate to ales than lagers.

 
Reply With Quote
Old 12-13-2006, 04:01 PM   #9
Dr Malt
Recipes 
 
Aug 2005
Pacific Northwest
Posts: 305
Liked 15 Times on 14 Posts


Dantodd:

I am not sure I am clear on your thinking on the diacetyl and not needing a diacetyl rest. Could you give me a brief reasoning on what you are referring to?

Thanks.

Dr Malt

 
Reply With Quote
Old 12-13-2006, 08:27 PM   #10
dantodd
 
dantodd's Avatar
Recipes 
 
Oct 2006
San Carlos, CA
Posts: 1,173
Liked 11 Times on 9 Posts


Diacetyl precursors are created in much greater abundance at high temperatures. Usually when you pitch at 70 and then drop of the 40s for fermentation there are enough diacetyl precursors to exceed the taste threshold for the average drinker. Bringing the beer up to 70 again about 3/4 of the way through fermentation will induce the yeast to consume the diacetyl precursors. If you pitch at fermentation temperatures there are many fewer precursors produced and even if they are converted to diacetyl it will be at below the taste threshold.

Jamil Z. in a podcast I listened to recently said he doesn't do a diacetyl rest and pitches at fermentation temperatures. I jsut listened to John Palmer on Basic Brewing and he pitches at fermentation temperatures and still does a diacetyl rest.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gelatin in Lager Primary Prior to Keg... Evan! General Techniques 17 04-18-2011 09:35 PM
ups.. Cold crashed my lager prior to primary Elfmaze General Beer Discussion 4 09-12-2009 07:41 PM
Lager Bottling: Pitch New Yeast? cdanprice General Techniques 4 05-14-2008 02:06 AM
Should I remove some of the yeast cake prior to pitching on it? RegionalChaos General Techniques 10 03-28-2008 02:26 AM
Pitching New Yeast Prior to Bottling slushy1975 Bottling/Kegging 2 06-23-2006 12:35 PM


Forum Jump