mash tun keggle question - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > mash tun keggle question

Reply
 
Thread Tools
Old 05-05-2010, 03:30 AM   #1
thenatibrewer
Recipes 
 
Jan 2007
cincinnati
Posts: 144


OK here it is. i would like to hear peoples opinions about what type of manifold people use for a keg that is converted to a mash tun. i have one that is very well insulated, but i have been working on manifold designs. i used to use a 10 gallon cooler from home depot. i had a false bottom in it. it seemed to work well but i wanted to use a keg. i just built a 3 tier sculpture. currently i put a 3/4" braided line in the bottom of my mash tun. my concern is the amount of space between the ball valve and the bottom of the keg. using a piece of 1/2 copper and some 45s i have the braided line lining on the bottom of the keg now. i guess the question is will this create a siphon so all or at least most of the wort would be drained? i also fly sparge if that matters. all opinions would be appreciated!!


__________________
He who drinks beer sleeps well. he who sleeps well cannot sin. He who does not sin goes to heaven. Amen.

-unknown monk

 
Reply With Quote
Old 05-05-2010, 03:47 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,152
Liked 1622 Times on 1050 Posts


Check this out http://www.homebrewtalk.com/f51/sank...s-braid-56183/


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-05-2010, 12:12 PM   #3
thenatibrewer
Recipes 
 
Jan 2007
cincinnati
Posts: 144

bobby,
i checked that thread out. that is what inspired me to do what i did. one difference is that i stopped the copper where your second 90 is.(only mine are 45s) then i attached the braided line to that.
i have a few questions, will it actually siphon and what kind of efficiency can i expect? any information will be appreciated, plus some pics of peoples setups would be cool too.
__________________
He who drinks beer sleeps well. he who sleeps well cannot sin. He who does not sin goes to heaven. Amen.

-unknown monk

 
Reply With Quote
Old 05-05-2010, 12:47 PM   #4
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 32 Times on 14 Posts


I use a SS tube curved to the bottom of the keg. It passes through a false bottom. Yes it does create a siphon effect, even when using gravity and leaves less then 1/2 cup of liquid behind.
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote
Old 05-05-2010, 01:06 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,152
Liked 1622 Times on 1050 Posts


I leave more wort behind with a false bottom than I did with that braid setup. It's very good at separating and it will definitely siphon.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-05-2010, 06:37 PM   #6
tomroeder
Recipes 
 
Jan 2010
Danville, IN
Posts: 110
Liked 1 Times on 1 Posts


So, if you had it to do over again, with your current natural gas setup, would you have the false bottom or that tube design?

 
Reply With Quote
Old 05-05-2010, 07:37 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,152
Liked 1622 Times on 1050 Posts


No question about it, the false bottom is required (in my opinion) if you want to direct fire the tun. I mean, I know you can stir your mash feverishly if you have thick mash touching the heating surface, but I think back to some RIS and barleywine batches where mash was overflowing the tun and think I'd definitely would have scorched bad.

If I was using the keg as a passive MLT with heating done in a RIMS tube or HERMS coil, I'd go with either the braid over tube design or a smaller false bottom with a bottom drain port.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-05-2010, 09:00 PM   #8
thenatibrewer
Recipes 
 
Jan 2007
cincinnati
Posts: 144

so i tested out the 1/2" copper pipe leading to the bottom of the keg. it siphoned all but just a very small amount of water out of the keg it was awesome. i am excited about brewing this weekend to test it out.
on my set up i am not using direct fire. i am going to preheat my tun then add grain and the rest of the water to reach the proper temp. i cannot wait.

by the way how to i add some pictures...i have some i want everyone to take a look at. thanks for all info so far.


__________________
He who drinks beer sleeps well. he who sleeps well cannot sin. He who does not sin goes to heaven. Amen.

-unknown monk

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best way to preheat a keggle mash tun? dmbnpj Beginners Beer Brewing Forum 8 09-28-2009 12:27 AM
Keggle Mash Tun - Sparging Griffsta All Grain & Partial Mash Brewing 8 03-26-2009 06:32 PM
Mash in Keggle - False Bottom vs. amount of mash water Griffsta All Grain & Partial Mash Brewing 2 03-24-2009 01:09 PM
Cooler vs. Keggle for Mash Tun jtvinny All Grain & Partial Mash Brewing 9 04-05-2008 04:47 AM
Mash Tun & Keggle WhoAmI All Grain & Partial Mash Brewing 7 01-16-2008 07:26 PM


Forum Jump