Wort Cooler - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers & Stir Plates > Wort Cooler

Reply
 
Thread Tools
Old 05-04-2010, 04:41 AM   #1
StAnthonyB
Recipes 
 
Nov 2009
New York
Posts: 326
Liked 1 Times on 1 Posts



I have a random 30 gallon aluminum pot laying around and 100' of copper coiled and a few lengths of copper pipe.

I got to thinking that maybe I should build a dual-set of immersion coils into the 30 gallon pot. Where one coil is toward the outer radius and the other coil is on the inner radius. The two coils would each be fed cold water seperately and exit seperately. And for a finishing touch add Jamil's whirlpool chiller idea to keep the wort moving.

(I run my wort cooling water into 40-gallon buckets and use it for cleaning up equipment and the brew house floor.)

To sanitize the wort chiller tank... I expect to clean thoroughly (as always) and drain and leave enough water, in the 30-gallon vessel where the copper coils have been fixed, so as to steam clean via direct application of heat from the bottom. With the 30-gallon vessel sealed from the top, it can be given ample time to cool down (say overnight).

I think it's just a matter of building it at this point. Since all the materials are sitting in my lap (sans a wort pump). I just wanted to throw this out there for you fellas to read.

The advantage I am thinking of here would primarily be in terms of cool thermal mass when the wort is transferred from boil tun to wort chiller tank. The benefits of the concept of running dual immersion chillers with the whirlpool concept go without argument.



post script...

The vessel is large enough to maybe use it as a jacket for my 14 gallon fermenter. This is another idea I am thinking of yet haven't posited. I only say this as I am basically done with fighting fermentation temperatures.

Anybody have good ideas for jacketed fermenters? I am always toying with fabricating a trough style fermenter along the lines of the Yorkshire squares: wider at the top and narrow toward the bottom to yield a greater ratio of surface area to volume than I am using now.


 
Reply With Quote
Old 05-04-2010, 11:52 PM   #2
brewslut
Recipes 
 
Aug 2008
Warren County,NJ
Posts: 542
Liked 7 Times on 6 Posts


I just wish I had a"random" 100' of copper and 30 gallon kettle laying about!
Sounds like it will chill great!!pics of the build please!(whatever you decide)
__________________
NJHOPZ
http://www.njhopz.com
Final Gravity Podcast
http://www.finalgravitypodcast.com

 
Reply With Quote
Old 05-05-2010, 11:09 PM   #3
StAnthonyB
Recipes 
 
Nov 2009
New York
Posts: 326
Liked 1 Times on 1 Posts


Quote:
Originally Posted by brewslut View Post
I just wish I had a"random" 100' of copper and 30 gallon kettle laying about!
Sounds like it will chill great!!pics of the build please!(whatever you decide)

I know. I know. It's a conundrum.

The only issue I have with building a chiller of such a large volume is that I just might very well begin to brew 20 gallons. Here I am considering the 4% increase in volume for hot wort.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wort Cooler sbushwhacker Chillers & Stir Plates 3 11-26-2009 02:15 AM
How vital is a wort cooler? sboro33 Beginners Beer Brewing Forum 14 12-13-2007 12:44 AM
Poor Man's Wort Cooler HopHeadWeb Beginners Beer Brewing Forum 13 12-11-2007 10:47 PM
Wort Cooler Chris_Dog Equipment/Sanitation 5 05-16-2007 01:08 PM
Wort cooler alternative RBX Equipment/Sanitation 4 04-28-2007 01:01 AM


Forum Jump