Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > Where can i find the cheapest SS compression fittings?
Reply
 
Thread Tools
Old 05-03-2010, 07:27 PM   #1
mikew2003
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Crawfordville,Fl
Posts: 7
Default Where can i find the cheapest SS compression fittings?

I need SS 1/2" elbow fittings for my heat exchanger coil in my HLT. The best deal i found so far was here http://www.gvc.net/p/4662/male-90-elbow however, the shipping turned out to be rediculous. Anyone know of a better deal?


mikew2003 is offline
 
Reply With Quote
Old 05-03-2010, 07:34 PM   #2
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,462
Liked 132 Times on 107 Posts
Likes Given: 11

Default

ebay. some patience. and search term "ss-810-2-8"

You should be able to find those for under $10 a pop.


Boerderij_Kabouter is offline
 
Reply With Quote
Old 05-03-2010, 08:25 PM   #3
erik
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2010
Location: San Jose
Posts: 48
Liked 2 Times on 2 Posts

Default

Better?
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT
erik is offline
 
Reply With Quote
Old 05-03-2010, 08:28 PM   #4
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,462
Liked 132 Times on 107 Posts
Likes Given: 11

Default

What size tube connection do you need? You need to make sure the tube connection and the threads are the right size.

The number I set out above is for 1/2" NPT x 1/2" tube elbow (ss-810-2-8).
Boerderij_Kabouter is offline
 
Reply With Quote
Old 05-03-2010, 08:50 PM   #5
MrShake
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2006
Posts: 1,200
Liked 5 Times on 5 Posts

Default

Seller Texas City Surplus has them if you send him a message.
__________________
MrShake - Top Hat Brewery

Project Links: Electric HERMS | Wet Bar

Primary - Air
On Commercial Tap - Sam Adam's Octoberfest
On Tap 2 - Air
On Tap 3 - Air
On Tap 4 - Easy English Mild
On Tap 5 - Air
MrShake is offline
 
Reply With Quote
Old 05-03-2010, 08:56 PM   #6
mikew2003
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Crawfordville,Fl
Posts: 7
Default

Thanks, yes the 1/2" NPT x 1/2" tube elbow is what I need X2
mikew2003 is offline
 
Reply With Quote
Old 05-03-2010, 08:58 PM   #7
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,462
Liked 132 Times on 107 Posts
Likes Given: 11

Default

eBay member JDtool has been great to deal with as well.

You can email him directly at jdtool6 at aol dot com.


Boerderij_Kabouter is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
compression fittings Rico6115 Equipment/Sanitation 14 08-06-2014 02:33 AM
Need some help finding the right compression tube fittings. EvilGnome6 Chillers and Stir Plates 1 07-08-2009 01:09 PM
Compression Fittings Help Stevorino Equipment/Sanitation 7 02-13-2009 02:14 PM
do these fittings match? (pipe to compression) nathan Other 3 11-14-2008 10:43 PM
okay to disassemble and reassemble compression fittings? scottfro Kettles, Mash Tuns, & Hot Liquor Tanks 3 10-09-2008 07:59 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS