Finally finished! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Finally finished!

Thread Tools
Old 05-02-2010, 10:36 PM   #1
Wade E
Beer Buster
Wade E's Avatar
Mar 2008
Middlebury, Ct.
Posts: 818
Liked 4 Times on 4 Posts

I have finally finished this contraption with the exception of a long 220 3 prong extension cord cause the fittings for this are hard to find but my brother is an electrician and has connections at a place that can special order these parts for me. I need the male and female 3 pronged 30 amp plugs that would go on a dryer or range and none of the big home improvement stores carry them, only a 6' cord, they dont even carry and plugs with this configuration. And the cord itself is $2.25 a ft. and I need 25' to brew where I want to outside when its warm out so that I dont have all that moisture and heat in my basement. During the winter I have a range hood that Im going to mount and vent outside. I had most of this done with the exception of the sparge arm and mounting the digital controller and wheels which I just finished up today after having to drag this system out yesterday morning and batch sparge. The sparge arm seems to work ok decent but we'll see once there is a grain bed in there. All electric so no worry about the flame being blown out or running out of propane and I have a huge generator in case the power ever goes out also!


Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finally finished my 4 tap kegerator! shildebr Kegerators & Keezers 24 09-25-2009 02:09 PM
Finally finished my first brew! josh912 Beginners Beer Brewing Forum 2 04-12-2009 02:55 PM
Finally finished!!! mullimat Bottling/Kegging 4 03-14-2008 05:34 PM
Finally finished the kegerator FireBrewer Home Brewing Photo Forum 25 06-25-2007 04:04 AM
It's finally finished Monster Mash Brew Stands 13 03-26-2007 07:24 PM

Forum Jump