Mystery Item - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Mystery Item

Reply
 
Thread Tools
Old 04-26-2010, 10:49 PM   #1
MgMt_Home_Brew
Recipes 
 
Aug 2008
Burlington, VT
Posts: 587
Liked 1 Times on 1 Posts



So a buddy of mine got one of those CL deals that you always read about. He got 11 cornie kegs, 1 25lb CO2 tank with regulator, 1 25lb Nitrogen tank with regulator, and some miscellaneous parts for $300. One of the parts we don't know what it is. Does anyone know what this is?

My thought was that it was some kind of aeration stone since the tip has a porous rock or something in it.






__________________
I once read about the dangers of drinking, I have since stopped reading. - Unknown


 
Reply With Quote
Old 04-26-2010, 11:01 PM   #2
GreenMonti
Recipes 
 
Nov 2009
Posts: 1,062
Liked 10 Times on 10 Posts


That is a spud to a regulator. It is for high pressure tanks. My guess it it came off the nitrogen setup. It is missing the nut. The nut will slide over the pipe before you screw the pipe into the regulator inlet.



 
Reply With Quote
Old 04-27-2010, 12:03 AM   #3
MgMt_Home_Brew
Recipes 
 
Aug 2008
Burlington, VT
Posts: 587
Liked 1 Times on 1 Posts


Quote:
Originally Posted by GreenMonti View Post
That is a spud to a regulator. It is for high pressure tanks. My guess it it came off the nitrogen setup. It is missing the nut. The nut will slide over the pipe before you screw the pipe into the regulator inlet.
Oh ok, awesome thanks for the info. So this is most likely the nut.



So the spud screws into the tank with the nut on it already. Then do the threads point away from the tank to towards the regulator?
__________________
I once read about the dangers of drinking, I have since stopped reading. - Unknown


 
Reply With Quote
Old 04-27-2010, 01:55 AM   #4
GreenMonti
Recipes 
 
Nov 2009
Posts: 1,062
Liked 10 Times on 10 Posts


Yes that is the nut. The threads on the nut go into the cylinder. The threads on the end on the pipe go into the regulator.

Here you go. You have the pieces on the right side of the reg.

http://www.micromatic.com/draft-keg-...id-GN1773.html

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Item on backorder...totally bummed out! FallsDamBrewery Beginners Beer Brewing Forum 7 02-17-2010 07:34 PM
Mystery hops...will make mystery beer mac1jw Hops Growing 5 09-02-2009 04:16 AM
Sweet item for anyone in the DC area. Seawolf Equipment/Sanitation 0 08-21-2008 07:51 PM
Most helpful item in your brewery The Happy Mug Equipment/Sanitation 35 11-15-2005 03:50 AM
Interesting eBay Item BBQBrew General Beer Discussion 10 07-04-2005 11:19 PM


Forum Jump