Please review my water test... What does this all mean??? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Please review my water test... What does this all mean???

Reply
 
Thread Tools
Old 04-23-2010, 12:05 AM   #1
tamoore
Recipes 
 
Feb 2010
Grayling, MI
Posts: 299
Liked 1 Times on 1 Posts



pH 8.0
Total Dissolved Solids (TDS) Est 161
Electrical Conductivity, mmho/cm 0.27
Cations / Anions, me/L 3.0 / 2.8
ppm
Sodium, Na 2
Potassium, K < 1
Calcium, Ca 42
Magnesium, Mg 9
Total Hardness, CaCO3 143
Nitrate, NO3-N 0.7 (SAFE)
Sulfate, SO4-S 3
Chloride, Cl 2
Carbonate, CO3 6
Bicarbonate, HCO3 140
Total Alkalinity, CaCO3 125
"<" - Not Detected / Below Detection Limit

Is this good water, bad water, or just OK?

Thanks for any guidance.


__________________
On tap:
ESB
My best IPA
Paddlers Pale Ale

On Deck:
3% Summer Session IPA
SNPA inspired pale ale.

Brewing this week:
Irish Red.

 
Reply With Quote
Old 04-23-2010, 12:24 AM   #2

take a look at John Palmer's "How to Brew" section on water chemistry - free online:
http://www.howtobrew.com/section3/chapter15-1.html

It will give you the basics of what you need to know.


__________________
My Hombrewing Blog

My Beer Cellar

 
Reply With Quote
Old 04-23-2010, 12:24 AM   #3
mightynintendo
HBT_SUPPORTER.png
 
mightynintendo's Avatar
Recipes 
 
Aug 2009
Raleigh, NC
Posts: 2,710
Liked 134 Times on 105 Posts


That actually looks pretty good for just about anything.
__________________
'Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne.'

—Kurt Vonnegut, Breakfast of Champions

 
Reply With Quote
Old 04-23-2010, 12:28 AM   #4

Quote:
Originally Posted by mightynintendo View Post
That actually looks pretty good for just about anything.
well, the chlorides and sulfates are real low...you'll want to adjust those
__________________
My Hombrewing Blog

My Beer Cellar

 
Reply With Quote
Old 04-23-2010, 12:40 AM   #5
mightynintendo
HBT_SUPPORTER.png
 
mightynintendo's Avatar
Recipes 
 
Aug 2009
Raleigh, NC
Posts: 2,710
Liked 134 Times on 105 Posts


Meh
__________________
'Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne.'

—Kurt Vonnegut, Breakfast of Champions

 
Reply With Quote
Old 04-23-2010, 12:41 AM   #6
mightynintendo
HBT_SUPPORTER.png
 
mightynintendo's Avatar
Recipes 
 
Aug 2009
Raleigh, NC
Posts: 2,710
Liked 134 Times on 105 Posts


Meh
__________________
'Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne.'

—Kurt Vonnegut, Breakfast of Champions

 
Reply With Quote
Old 04-23-2010, 12:42 AM   #7
Teromous
Beer Gnome
HBT_LIFETIMESUPPORTER.png
 
Teromous's Avatar
Recipes 
 
Sep 2009
Virginia Beach, VA
Posts: 2,958
Liked 560 Times on 306 Posts


I don't see one important chemical listed: BeER

 
Reply With Quote
Old 04-23-2010, 12:50 AM   #8
Duffer
Recipes 
 
Mar 2010
Camano Island, WA
Posts: 72

Ok. I charted your water on the Palmer site, mostly for my own practice! Your water plots out about mid-way up the SRM scale. About pH 5.85.

FYI: To get your plot down to 5.65 (light color beers) and adjusting by calcium addition you would need to add about 175ppm Ca/gal.

Splitting that between gypsum and calcium chloride and assuming 4 gallons liquid in the mash, you would add 4.9 grams of CaCl and 5.7 grams of gypsum.

Gimme a minute and I'll figure up the other direction.

 
Reply With Quote
Old 04-23-2010, 01:00 AM   #9
Duffer
Recipes 
 
Mar 2010
Camano Island, WA
Posts: 72

If you want to adjust for a super dark brew (pH 6.05) then you would add 2.4 grams of baking soda for 4 gallons of wash water. That's quite a bit of sodium, but since your water has basically none now....

If you like to brew all styles, then I would think having water like yours (right in the middle) is not a bad place to be!

 
Reply With Quote
Old 04-23-2010, 01:13 AM   #10

Quote:
Originally Posted by mightynintendo View Post
Meh
with those low values, beers will turn out less crisp and hop flavor will be "muddled"...just sayin'...


__________________
My Hombrewing Blog

My Beer Cellar

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Free 3M home water test kit. dave73ok Brew Science 18 07-01-2013 03:29 PM
Water home test kit bob_boblaw All Grain & Partial Mash Brewing 4 12-11-2009 07:58 PM
Anyone used the Home Depot water test SSRider All Grain & Partial Mash Brewing 7 01-31-2009 07:20 PM
Water test kits greggor General Beer Discussion 1 12-03-2008 03:54 PM


Forum Jump