Weldless brew stand. - Page 64 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Weldless brew stand.

Reply
 
Thread Tools
Old 04-22-2013, 08:28 PM   #631
reuliss
Recipes 
 
Dec 2012
Posts: 432
Liked 39 Times on 19 Posts


Has anyone used one of these builds on a wooden deck? I'm interested, but concerned about how hot everyone says this thing gets. I use my grill on the deck without concern, but that thing doesn't heat up towards the bottom. My guess is that the casters themselves aren't getting too hot, but I'd really prefer not to start a fire!!

 
Reply With Quote
Old 04-23-2013, 11:45 AM   #632
SuckaMooHudda
 
SuckaMooHudda's Avatar
Recipes 
 
Aug 2011
Chicago, IL
Posts: 86
Liked 7 Times on 7 Posts


Mine is cool to the touch except for about the top 1/4. I would have total confidence using mine on a deck, for sure... and there is nobody more paranoid than me. Also, mine is not on casters.

 
Reply With Quote
Old 04-24-2013, 12:52 AM   #633
reuliss
Recipes 
 
Dec 2012
Posts: 432
Liked 39 Times on 19 Posts


Quote:
Originally Posted by SuckaMooHudda
Mine is cool to the touch except for about the top 1/4. I would have total confidence using mine on a deck, for sure... and there is nobody more paranoid than me. Also, mine is not on casters.
Thank you for that feedback!

 
Reply With Quote
Old 05-03-2013, 04:00 PM   #634
hunter_la5
Sheriff Underscore
HBT_SUPPORTER.png
 
hunter_la5's Avatar
Recipes 
 
Jul 2012
New Braunfels, Texas
Posts: 12,771
Liked 5758 Times on 3297 Posts


Slowly making progress on mine.




Click image for larger version

Name:	image-1081879101.jpg
Views:	929
Size:	57.6 KB
ID:	119678


So much awesome in this thread.
__________________
:taco:

 
Reply With Quote
Old 05-15-2013, 01:10 AM   #635
BlindFaith
Recipes 
 
Oct 2012
Lexington, SC
Posts: 303
Liked 8 Times on 7 Posts


I am assuming the McMaster-Carr part numbers have changed from the initial build by sam and bender because when I search for them I get the right dimensions of slotted angle, but different part numbers: http://www.mcmaster.com/#catalog/119/1915/=mr3y0u

I am planning on building one of these over the next few months and didn't feel like perusing through the entire thread (laziness ) to get an answer, so I thought I would ask. The 2 1/4" x 1 1/2" angle is now listed as 4664T19 and the 1 1/2" x 1 1/2" is listed as 4664T18. Are those the same part numbers that were used by anyone who recently ordered?

 
Reply With Quote
Old 07-15-2013, 12:45 AM   #636
sudndeth
Recipes 
 
May 2010
Charleston
Posts: 311
Liked 11 Times on 8 Posts


Alright, I did it. Turned out nice so far. Adding burners in a few weeks. I'm also going to change the pump so the outlet is pointing up. I think I'm going to do banjo burners. Does it really matter high or low pressure?
Click image for larger version

Name:	image-2148077961.jpg
Views:	1231
Size:	53.4 KB
ID:	135210   Click image for larger version

Name:	image-578235201.jpg
Views:	1131
Size:	73.7 KB
ID:	135211   Click image for larger version

Name:	image-572817599.jpg
Views:	1081
Size:	64.7 KB
ID:	135212  

 
Reply With Quote
Old 09-17-2013, 08:14 PM   #637
LarryN
Recipes 
 
Sep 2013
Posts: 3

I'm finishing up my slot steel brew stand (Brew'in Hilda) I have Hurricane 60K/BTU burners installed (two),I do single infusion mash for now but will eventually try stepped mash, I'm ready to pipe my stand for LPG. Since the hurricane burners work on 11" WC what regulator are you using with your rig? Can two burners run at the same time with enough LPG volume to crank them up to max BTU if I needed it with a 11" WC regulator. I'd probably run my boil kettle burner while sparging just to stop enzyme action on the wort over the 30minute sparge while simultaneously keeping the sparge water at 170 degrees in the HLT.
I guess if I have to ask this seemingly silly question I should have someone else pipe up the system for me although someone once said there are no stupid questions only stupid answers
Click image for larger version

Name:	LPGMistake.jpg
Views:	909
Size:	13.7 KB
ID:	148759  

 
Reply With Quote
Old 09-18-2013, 01:20 AM   #638
pmcint01
Recipes 
 
May 2013
Posts: 204
Liked 14 Times on 13 Posts


They look sweet.

 
Reply With Quote
Old 02-25-2014, 06:12 PM   #639
flh73
HBT_SUPPORTER.png
Recipes 
 
Feb 2014
Posts: 5

What kind of pumps did u use.

 
Reply With Quote
Old 02-26-2014, 02:25 AM   #640
sudndeth
Recipes 
 
May 2010
Charleston
Posts: 311
Liked 11 Times on 8 Posts


I have a chugger pump


Sent from my iPhone using Home Brew

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Brew Stand PinupBrewery For Sale 52 03-28-2012 02:11 AM
New Brew Stand PinupBrewery Equipment/Sanitation 12 01-07-2011 07:48 PM
WeldLess Fitting for Brew Pot - Good or Bad? bmckee56 Equipment/Sanitation 12 12-30-2010 03:54 PM
Looking to buy a Brew Stand! jaywoz360 For Sale 2 01-29-2010 06:48 PM
Brew Stand Jeremy981 All Grain & Partial Mash Brewing 2 04-24-2007 04:51 PM


Forum Jump