Yeast Suggestion - Double IPA - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > Yeast Suggestion - Double IPA

Reply
 
Thread Tools
Old 04-19-2010, 06:03 PM   #1
EnVinoVeritas
Recipes 
 
Jan 2009
Gilbert, AZ
Posts: 29


Here is the recipe I wanted to model after..."Damn Devil Double IPA"

Damn Devil Double IPA
---------------------
Brewer: DT
Style: Imperial IPA
Batch: 5.00 gal

Characteristics
---------------
Recipe Gravity: 1.128 OG
Recipe Bitterness: 152 IBU
Recipe Color: 14 SRM
Estimated FG: 1.032
Alcohol by Volume: 13.2%
Alcohol by Weight: 10.1%

Ingredients
-----------
Light malt extract 8.00 lb, extract
Extra Light D.M.E. 6.00 lb, extract
Wheat D.M.E. 1.00 lb, extract
Crystal 20L 1.00 lb, steeped
Gambrinus honey malt 1.00 lb, steeped
Briess victory 0.50 lb, steeped

Warrior 2.00 oz, whole, 60 minutes
Amarillo 0.33 oz, pellet, 45 minutes
Amarillo 0.33 oz, pellet, 30 minutes
Amarillo 0.33 oz, pellet, 15 minutes
Amarillo 0.33 oz, pellet, 10 minutes
Amarillo 0.33 oz, pellet, 5 minutes
Amarillo 0.33 oz, pellet, 0 minutes
Simcoe 0.33 oz, pellet, 45 minutes
Simcoe 0.33 oz, pellet, 30 minutes
Simcoe 0.33 oz, pellet, 15 minutes
Simcoe 0.33 oz, pellet, 10 minutes
Simcoe 0.33 oz, pellet, 5 minutes
Simcoe 0.33 oz, pellet, 0 minutes
Centennial 0.33 oz, pellet, 45 minutes
Centennial 0.33 oz, pellet, 30 minutes
Centennial 0.33 oz, pellet, 15 minutes
Centennial 0.33 oz, pellet, 10 minutes
Centennial 0.33 oz, pellet, 5 minutes
Centennial 0.33 oz, pellet, 0 minutes
Crystal 1.00 oz, whole, Dry Hop

American Ale yeast 1.00 unit, 2 packets of US-56 dry yeast

Notes
-----
Recipe Notes:
Hops - after the Warrior - 14.5%AA for bittering, use 1 oz. of SAC blend (0.33 oz. Simcoe - 12%AA, 0.33 oz. Amarillo - 8.3%AA, 0.33 oz. Centennial - 9.9%AA) for each hop addition. The Crystal - 3.5%AA is a dry hop. Dry hop for 1 week.

Question:

I wanted to use US-05 or Wyeast American Ale (Am. Ale II?) but am concerned about the alcohol tolerance of the yeast... Most of the tech specs on the yeast say the tolerance is 10-11% - the final estimate alcohol percentage is 13%. Not sure if any of you have suggestions on this. Or should I reduce the amounts of malt/hops to lower abv and keep it balanced?

I also don't want the IPA to be too sweet. I thought reduce extra light dme by two lbs and adding 2 lbs of dextrose might help.

Help and suggestions appreciated.

Thanks,

Ryan

 
Reply With Quote
Old 04-19-2010, 06:18 PM   #2
steinsato
Senior Member
HBT_LIFETIMESUPPORTER.png
 
steinsato's Avatar
Recipes 
 
Jan 2010
Santa Fe, NM
Posts: 1,232
Liked 13 Times on 13 Posts


I made a big IPA with an OG of 1.101. I ended up using S-04. I beleive it has a higher alcohol tolerance than US-05.
__________________
"The ordinary world is only the foam on top of the real world." Tom Robbins (B is for Beer)
"It's a beautiful day for baseball. Let's play two." Ernie Banks

 
Reply With Quote
Old 04-19-2010, 06:34 PM   #3
janzik
 
janzik's Avatar
Recipes 
 
Sep 2007
Old Bridge, NJ
Posts: 531
Liked 1 Times on 1 Posts


Neverminding that this is out of style...

Vital Statistics: OG: 1.070 1.090
IBUs: 60 120 FG: 1.010 1.020
SRM: 8 15 ABV: 7.5 10%

I'm not sure I'd want to drink something that finished at 1.032. You mention you don't want anything that's going to be too sweet, well, this kind of gives me the douche chills thinking about how cloying it will be. Personally I would shoot for something at the high end of the style first (closer to 1.090, than something over 1.1, like your recipe suggests.

Back to your question, though. I had a 1.088 that I used a 2-3L starter (I forget offhand) of WLP001 and after 10-12 days it was stuck at 1.026 (which btw, was sweet in a 123IBU recipe). I tossed in a packet of US05 and I was able to get it down to 1.016. It tastes pretty good, but I'm still waiting for it to carbonate.

I'm not versed in using LME/DME in my recipes, so I couldn't tell you specifically how to tweak it, but, I would shoot for a 1.090 recipe with a BU/IBU of over 1.1 (it's a field in Beersmith). So pretty much anything in the 1.080s and above you'd probably want 100-150IBU (anything over 100 is supposedly percieved, but you can write it up that way).
__________________
-Joe

 
Reply With Quote
Old 04-19-2010, 06:48 PM   #4
Jumbo82
 
Jumbo82's Avatar
Recipes 
 
Dec 2007
Plymouth, New Hampshire
Posts: 501
Liked 3 Times on 3 Posts


I'd definitely replace some of the LME with cane sugar to help dry it out. I made a Pliney the Bastid clone a while back with O.G. 1.075 and got it to finish at 1.012 with the help of some simple sugars. With your estimated O.G. of 1.128, I think you're going to have trouble getting most yeasts to finish the job. I'd tone it down a bit as janzik suggests and be sure to pitch plenty of healthy yeast (use the Mr. Malty pitching rate calculator). By the way, Beer Smith calculated I had 233 IBUs in the Pliney clone I made and its one of the best beers I've ever made, so don't be afraid to go crazy with the hops. Good luck and let us know how it turns out.

 
Reply With Quote
Old 04-19-2010, 07:59 PM   #5
EnVinoVeritas
Recipes 
 
Jan 2009
Gilbert, AZ
Posts: 29

I do not really care about having a high abv, but something drinkable. I may just modify the malt bill.

I would like to know if you have had any experience using Pacman Yeast - I guess it has really good attenuation and may help with this brew especially since it is purported to have a higher alcohol tolerance...

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Olde Ale Yeast suggestion starrfish Recipes/Ingredients 14 12-23-2011 11:13 PM
Brewing a Double IPA - Double the yeast? airmike Beginners Beer Brewing Forum 5 03-24-2010 03:27 PM
Double batch... Double yeast? mximus11 Fermentation & Yeast 6 03-18-2010 11:59 PM
Yeast suggestion Ryno All Grain & Partial Mash Brewing 3 02-21-2009 09:35 PM
Dry lager yeast suggestion Brewer3401 Recipes/Ingredients 4 07-03-2007 01:43 PM


Forum Jump