long time bottler 1st time kegger..help! - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > long time bottler 1st time kegger..help!

Reply
 
Thread Tools
Old 04-15-2010, 07:34 AM   #1
Schnitzengiggle
Recipes 
 
Feb 2009
Tucson, AZ
Posts: 2,560
Liked 31 Times on 23 Posts



So I recently ordered my kegging equipment, my dual tower was on back order, but I think it shipped yesteday or today. Regardless, I want everybody's advice.

What would you recommend to do/not to do as a first time kegger.

I will have a 2 corny keg mini fridge with dual tower, perlick faucets, and a dual body taprite regulator.

If you made any mistakes, or have learned anything that has helped you tremendously, please inform me, I would greatly appreciate it.

Any info is welcome, do not hesitate.
__________________
follow me @ Broken Glass Brewery

Okham's Razor - simplest explanation is usually the correct one.

My DIY Kegerator - My DIY Fermentation Chamber - My DIY Portable Pump Box

 
Reply With Quote
Old 04-15-2010, 12:50 PM   #2
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
Liked 20 Times on 19 Posts


ALWAYS check for CO2 leaks... Especially after you change the CO2 tank. Coming home to an empty bottle sux!
And keg lube is your friend. Use it religiously

LFMF
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 04-15-2010, 01:42 PM   #3
Pubwilson
Recipes 
 
Feb 2010
San Antonio, Texas
Posts: 117


1. Always turn gas off before servicing (removing) your beverage lines. I have lost more than a few pints this way.
2. Be very careful with your PSI gauges. They can break with even the slightest nudge.
3. Tighten all connections. Then tighten again.
4. Use a rug to catch drips unless you have a drip pan. I am poor, I use a rug.
5. Beverage connections leak slightly when you remove them from the keg. Remember to wipe them down to prevent a sticky mess.
6. Beer is sticky.
7. To help with number 1, remove the beverage line 1st.
There is much more to kegging, and I am sure others will add their knowledge. Good Luck and Happy Kegging!
Just my two pints...
__________________
"I am a homebrewer, and I approve this homebrew!"
Alamo Stew's Homebrews

 
Reply With Quote
Old 04-15-2010, 03:03 PM   #4
azscoob
Brewpub coming soon!
HBT_SUPPORTER.png
 
azscoob's Avatar
Recipes 
 
Jun 2009
Lake in the Hills, IL
Posts: 7,452
Liked 273 Times on 209 Posts


1) Try to do the set and forget method of carbing if possible.
2) If you need to carb in a big ole hurry, shake the piss outa the keg at SERVING temp and pressure, not at crazy high pressures and temps so you dont overcarb
3) Plan on trouble shooting your system endlessly until it works well for YOU, every system is different and has its own quirks.

Those are my big pointers that work for me and my kegs.
__________________
Shirts n Steins: Grain Reaper Brewing


I seem to have misplaced my trousers... ~Grainreaper

 
Reply With Quote
Old 04-15-2010, 03:08 PM   #5
Special Hops
Recipes 
 
Jun 2008
Kanatenah
Posts: 1,430
Liked 22 Times on 20 Posts


Don't cut the beer lines off shorter because "you don't really need all that tubing". Did that and am still kicking my self every time I get more foam then needed. Thinking about replacing my lines.

 
Reply With Quote
Old 04-15-2010, 09:03 PM   #6
Pubwilson
Recipes 
 
Feb 2010
San Antonio, Texas
Posts: 117


Quote:
Originally Posted by Special Hops View Post
Don't cut the beer lines off shorter because "you don't really need all that tubing". Did that and am still kicking my self every time I get more foam then needed. Thinking about replacing my lines.
+1 on the hose length. I too thought I had overly long serving lines, but now I am replacing all of them with 10 footers.
__________________
"I am a homebrewer, and I approve this homebrew!"
Alamo Stew's Homebrews

 
Reply With Quote
Old 04-15-2010, 09:51 PM   #7
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


Don't buy into the myth you need 10ft of line to get a good pour. Biggest pile of crap spread on this site. I know my life is to short to spend half of it waiting for a beer to pour.

And force carb with some common sense.


Let me amend that. If all you drink is beers carbed to 3+ volumes I would up the line length. I personally dislike hefes, so it's not a problem.


 
Reply With Quote
Old 04-15-2010, 10:52 PM   #8
Hethen57
Recipes 
 
Feb 2010
North Idaho
Posts: 132
Liked 3 Times on 2 Posts


Make sure your lid is seated properly...it may look like it is seated and the clamps may be clamped, but it needs to be pulled up tight or you will leak C02. Also, you may want to test out the controls a little and do a dry run with your tank filled with some One Step, you won't waste much C02 if it's full of liquid and you can figure out how everything works while you are doing a final sanitizing. I'm just waiting for a beer in my secondary to finish dryhopping so I can "go live" with my new keg setup as well.

 
Reply With Quote
Old 04-15-2010, 11:06 PM   #9
blackwaterbrewer
Recipes 
 
Dec 2008
virginia beach
Posts: 704
Liked 7 Times on 6 Posts


if you force carb, chill the beer overnight first, then do the force carb thing at about 20 psi. the beer will absorb the CO2 better if the beer is cold. take the time to run your CO2 line outside the fridge to the bottle. it saves room in the fridge.
__________________
it's not the blood you've spilled that gets you what you want, its the blood you share. friends, family, community: these are the most valuable things a man can have.

Primary-
Lagering-
Primary-
secondary-
secondary-
on tap- lemongrass kolsch
on tap- stout
on tap- small mead
bottle-sweet mead
bottle-

 
Reply With Quote
Old 04-15-2010, 11:22 PM   #10
EonBlue66
Recipes 
 
Oct 2008
Phoenix, AZ
Posts: 210
Liked 2 Times on 2 Posts


Make sure all of your taps are closed before hooking up a keg.
__________________
We'll ride the spiral to the end and may just go where no one's been.

Spiral out. Keep going, going...

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another first time kegger mojotele Bottling/Kegging 21 03-03-2010 10:24 PM
first time bottler question :) sluppy Beginners Beer Brewing Forum 5 03-20-2009 10:16 AM
First Time Kegger Mr_Sar Bottling/Kegging 1 07-27-2007 11:19 PM
1st time kegger, long time drinker (oh and 1st time poster as well) believeinsteve Bottling/Kegging 5 06-29-2007 03:54 AM
First time kegger.... Indiana Red Bottling/Kegging 5 05-22-2006 12:26 AM


Forum Jump