GR Style Regulator Parts Needed - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > GR Style Regulator Parts Needed
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 04-15-2010, 12:40 AM   #1
TRainH2o
Recipes 
 
Aug 2009
North Georgia
Posts: 430
Liked 7 Times on 6 Posts



I have an older GR style regulator that leaks. It is a North American Dispense Systems model 70012. NADS, now Taprite, says that they no longer have the repair kit. Anyone know where to check. Keg Connection comes to mind. Other suggestions? Thanks.



 
Reply With Quote
Old 04-24-2010, 01:43 PM   #2
bendavanza
Recipes 
 
Aug 2008
Oak CLiff, TX
Posts: 2,179
Liked 18 Times on 16 Posts


I just found this and sent weekendbrewer an email about availability, I need a kit, too.
http://www.examiner.com/x-15785-Sacr...that-regulator


__________________
My brew tree
My RIMS toolbox

 
Reply With Quote
Old 04-24-2010, 03:05 PM   #3
TRainH2o
Recipes 
 
Aug 2009
North Georgia
Posts: 430
Liked 7 Times on 6 Posts


Thanks for the reply. I was told that it uses the same parts as a Micromatic regulator. I found one on Mark Powers.com. Thanks again.

 
Reply With Quote
Old 05-01-2014, 05:04 PM   #4
Jstout
Recipes 
 
Apr 2014
Posts: 8
Liked 1 Times on 1 Posts


I know this is an older post, but if anyone knows which micromatic regulator repair kit will work on the NADs 70012 please let me know. I'm trying to repair one. Thanks.

 
Reply With Quote
Old 05-08-2014, 04:52 PM   #5
Jstout
Recipes 
 
Apr 2014
Posts: 8
Liked 1 Times on 1 Posts


Just an FYI if you have this older model NADS 70012 regulator that needs repaired and you want to take a chance on fixing it. NADS was bought by Taprite and there is no longer parts for any NADS models. However, the Micromatic Economy Series Secondary Regulator Repair Kit 8000-15 Is almost an exact match. The Economy Series Regulator Seat Capsule Assy 8402 is a little off, but I got it to fit. I had to tighten it down firmly. Also, don't forget a 84010 Seat Spring. It's also slightly smaller, but worked. http://www.micromatic.com/draft-keg-...-pid-8011.html

I actually have two of these NADS Regulators and this Micromatic kit worked on one and not the other. Your odds are 50/50.

The older model Taprite repair kit looks like it could work also, but I didn't try it. The Diaphragm and Regulator Pressure Plate are one piece, but appear like they "might" work. http://www.chicompany.net/index.php?...gulator+repair

Also, the Draught Technologies repair kit looks like it might be an exact match, but again I haven't tried it. http://rapidswholesale.com/beer-supp...pair-pack.html

These are very old regulators and you might just want to buy a new one.

Reason: New information

Stealthcruiser Likes This 
Reply With Quote
Old 05-23-2014, 07:09 PM   #6
Jstout
Recipes 
 
Apr 2014
Posts: 8
Liked 1 Times on 1 Posts


Update: Forget most of the above advice. The way to go is draught technologies repair kit from rapids wholesale. It's an exact match. The kit doesn't come with a Bonnet Gasket, but the micro matic one seems to work fine.

http://rapidswholesale.com/beer-supp...pair-pack.html



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Propane gas manifold and the parts needed? SouthernYankee Equipment/Sanitation 9 09-27-2010 02:30 PM
WTB: CO2 Regulator Replacement Parts doggage For Sale 4 04-03-2010 04:48 PM
Is a dual body regulator needed? mikejamesnelson Bottling/Kegging 8 02-23-2010 04:15 AM
A little help needed for keezer parts RBChallenger Kegerators & Keezers 7 03-15-2009 05:10 PM
What parts needed for corny rebuilds/operation Hikeon3 Bottling/Kegging 4 06-17-2008 09:33 PM


Forum Jump