Lets see your input/output pump manifolds... - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Lets see your input/output pump manifolds...

Reply
 
Thread Tools
Old 04-10-2010, 07:34 PM   #1
NinjaJoe
Recipes 
 
Jan 2010
Columbia
Posts: 146



...I'm working on the design of my new all electric 3 keggle system and I'm interested to see what you guys/gals have for your input/output pump manifolds.

I plan to use 2 pumps, a copper HEX in my HLT, a sparge ring in my MLT and a whirlpool return in my BK.

I'm considering including a valve for a dedicated in-line water filter and an in-line O2 setup.

I plan to hard pipe all this and more than likely will replace the valves post design/pre construction with motorized ball valves.

 
Reply With Quote
Old 04-10-2010, 08:15 PM   #2
DrKarma
 
DrKarma's Avatar
Recipes 
 
Feb 2009
Sweden
Posts: 163
Liked 3 Times on 3 Posts


http://www.homebrewtalk.com/f51/i-de...ml#post1261588

On page one in that thread you have a table of content (first post). No motorized valves in my system.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
SSR Heat Output? RonRock Brew Stands 9 02-08-2010 04:35 PM
CO2 manifolds trainfever Bottling/Kegging 7 11-24-2009 10:54 PM
What to use Alarm relay output on PID for??? flananuts Equipment/Sanitation 2 10-07-2009 04:12 PM
manifolds saskman Equipment/Sanitation 15 11-18-2007 03:32 AM
CO2 regulator NOT 5/16 output. cpbergie Bottling/Kegging 2 04-22-2007 06:40 AM


Forum Jump