I need help for my Y8610U Intermitent pilot retrofit kit.
This kit contains :
- S8610U Intermitent pilot module
- VR8304M Dual valve combination gas control
- 392431 Igniter-sensor
- 394800-30 Ignition cable
- 393691 Natural gas to LP conversion kit
I have also : Q314A6094 Pilot Burner for natural or LP gas
I use the convertion kit for using it with LP gas.
The pilot module is control by my Omron CPM1A-30CDR PLC.
I have wired it like this :
When the pilot module is power, there is no gas in the pilot burner and no spark in the igniter senser.
First I tryed to solved the first problem (no gas in the pilot burner)
I mesured the voltage between "24V GND" and "TH-W", I have 24V. I also mesured between "PV" and "MV-PV", I have just 0.7V.
the LED is blinking for 4 seconds and stop blinking for 1 second.
I think it is not normal and I think the pilot valve is not open when the pilot module is power.
I do not understand what happen.
Anybody can help me ?
PS : Sorry for my bad english, I am French.