faucet on keg adapter - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > faucet on keg adapter

Thread Tools
Old 03-26-2010, 09:34 PM   #1
Aug 2008
Posts: 157
Liked 3 Times on 2 Posts

Have any of you guys used the faucets that mount right on the disconnect for a corny? i am wondering if they are alright or kinda junky. i think that would be handy, no holes in the fridge that way, but after reading about line length problems, that looks like you may end up with massive foam and not a lot of beer. is there something to combat the foam internally, or do you have to crank the serving pressure way back every time you pour?

faucet with disconnect

Reply With Quote
Old 03-26-2010, 09:38 PM   #2
Aug 2008
Portland OR
Posts: 5,387
Liked 63 Times on 59 Posts

I use them if I take a keg somewhere. Bleed off most of the keg pressure and it works fine, then you need to pump a bit of CO2 as needed to keep a flow.

Reply With Quote
Old 03-27-2010, 12:00 AM   #3
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 302 Times on 235 Posts

It will work very well for you. Just follow the information in this thread The cure for your short hose troubles posted by pjj2ba.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Apartment brewers' faucet hose adapter gtpro Equipment/Sanitation 3 01-06-2010 04:20 AM
WTT: Standard Faucet/Shanks for Stout Faucet Baja_Brewer For Sale 1 06-24-2009 12:10 PM
Adapter from hose to beer faucet Zen_Brew Bottling/Kegging 4 05-07-2009 03:31 PM
Creamer faucet (not beer engine or stout faucet) david_42 Bottling/Kegging 8 02-05-2008 04:58 PM
Screwy faucet threads - no ability to connect wort chiller to kitchet faucet Boston Brewer Beginners Beer Brewing Forum 14 10-23-2007 01:58 AM

Forum Jump